Recommended Vent Cover Replacement For A Fan-Tastic Vent RV Roof Vent

Question

Question:

I bought a new MAXXAIR ll RV vent cover to replace the same brand/model which I bought in 2018. The new one is 2inch narrower than the old one, which makes it a tight fit onto my 14x14 Fantastic Fan. Clearly MAXXAIR changed the size - do they also make one of the original 2018 size?

asked by: Carole

0

Expert Reply:

MaxxAir and Fan-Tastic Vent Fans are two different brands so you'd be better off with a cover like the Dometic FanTastic Ultra Breeze Trailer Roof Vent Cover # FVU1500BL or # FVU1500WH (white). The MaxxAir II RV and Trailer Roof Vent Cover w/ EZClip # MA86JR you were looking at is 17-1/2" wide, whereas the # FVU1500BL is 19-1/2" wide.

I recommends switching over to the Dometic/Fan-Tastic branded cover to prevent any further fitment issues.

expert reply by: Kevin C

0

Answer 1

I suggest the Fan-Tastic Vent Ultra Breeze Trailer Roof Vent Cover - 23" x 19.5" x 10.25", #FVU1500WH. This is designed to fit all Fan-Tastic Vent trailer roof vents. It is common for the vent lid to make some contact with covers…

view full answer...

Answer 2

As you may have already found, 5200 lb, 6000 lb and 7000 lb axles can all use the same components including inner/outer bearings, hubs and brakes. Here are some other things they share in common: Dexter 5200 lb Regular Duty Axle - 0.180 inch tube…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

I am sorry but we do not have an AC cover with those dimensions. The closest option we have is the Replacement RV Air Conditioner Cover for Penguin and Dometic Air Conditioners item #AT3308046006 which measures 40-1/2" long x 29" wide x…

view full answer...

Answer 6

If you have the Gooseneck versions of the Curt CrossWing ( #C92DR or #C32DR) you unfortunately would not be able to use the Rota-Flex with it. The pivoting head causing too much strain for the single point of contact you have with a gooseneck hitch.…

view full answer...

Answer 7

Hey Tim, thanks for reaching out! The Stromberg Carlson Base Pad Extreme for RVs and Trailers #SC33VR have a 6,000 lb rating for each Base Pad Extreme so you're looking at a total of 36,000 lbs for this kit of 6. Ideally your jacks will have the…

view full answer...

Answer 8

The Clearsource Ultra RV Water Filter System w/ VirusGuard #CS87FR weighs 34.125 lbs.

view full answer...

Answer 9

We have the following Gen-Y shock absorbing 5th wheel pin boxes which are compatible with the Lippert Rhino pin box bolt pattern. The weights listed below are the maximum capacities the pin box is capable of supporting. 21,000 lbs - 3.5K TW #GY86GR…

view full answer...