Does Saris Bones EX Trunk Bike Rack Fit 2022 Honda CR-V Hybrid Touring

Question

Question:

Unfortunately, part # SAR83FR states that it is not compatible with 2022 Honda CRV Hybrid Touring AWD, so it is not compatible with all 2022 Honda CRV models, correct?

asked by: Kevin H

0

Expert Reply:

Sorry for the confusion but the Saris Bones EX part # SAR83FR does fit all models of the 2022 Honda CR-V including the Hybrid Touring AWD.

expert reply by: Jameson C

0

Answer 1

I confirmed with Saris that the Hatch Huggers #SA3035 are required to mount the Saris Bones EX 3 Bike Rack #SA803 on a 2020 Subaru Forester. The Hatch huggers allow for a more customized fit for hatchback vehicles or vehicles with certain spoilers.

view full answer...

Answer 2

We haven't personally test fit the Saris Bones EX 2 Bike Rack #SAR83FR to your 2024 Honda CR-V, but according to Saris this rack is a fit for your vehicle. This bike rack can handle up to 2 35lb bikes, will work with spoilers, and is made in…

view full answer...

Answer 3

The Saris Bones EX 3 Bike Rack #SA803 is a confirmed fit for your 2020 Subaru Forester, and is a top of the line trunk mounted rack that will support 3 bikes weighing up to 35lbs each. This rack does allow for the arms to fold down when not in use to…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…

view full answer...

Answer 6

The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part #RG06-010, which is a double-lip seal sold as a…

view full answer...

Answer 7

The etrailer trailer hitch I recommend for your 2022 Ford Edge is the part #e36RR because it has a hidden crosstube as well as a higher weight rating. This means you have a better looking hitch setup with better ground clearance and a higher weight…

view full answer...

Answer 8

We do carry electric brake assemblies as well as hub/drum assemblies. To determine the correct fit, you will need to measure the spindles of your axles. I've attached a photo to assist with the measurement locations, and recommend using a digital…

view full answer...

Answer 9

Typically, when the outside edges of a tire are showing wear its because the tires are under-inflated. The solution is to inflate the tires to the maximum pressure listed on the sidewall. Now if the outside of tires have what looks like gouges are…

view full answer...

Answer 10

The Correct Track Trailer Alignment and Lift Kit - Tandem Axle #RR23QX does come with all of the components needed to lift a tandem axle trailer. The center hangers of a tandem axle setup use different components than the front and rear hangers since…

view full answer...

Answer 11

In regards to the Correct Track Trailer Alignment and Lift Kit part #RR23QX, the kit provides a lift by essentially extending the hangers. This normally requires cutting off the old hangers and welding on new, taller ones but with this kit you…

view full answer...

Answer 12

The Correct Track Trailer Alignment and Lift Kit part #RR23QX offers a 1-1/4" or 2-1/4"lift so if the hitch height height is lower than the vehicle hitch height you can use this kit to bring the trailer level with the vehicle and eliminate…

view full answer...

Does Saris Bones EX Trunk Bike Rack Fit 2022 Honda CR-V Hybrid Touring

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching