Will the T-Track Adapter for Thule Cargo Boxes Work With the Rhino Rack Recon Bars

Question

Question:

Does this work with rhino rack recon bars? I have the motion xt L. And the rhino backbone system.

asked by: Oscar M

0

Expert Reply:

Yes, the T-Track Adapter for Thule Cargo Boxes with PowerClick # TH27PQ will work with your Rhino Rack Recon bars, as these adapters will work on any set of crossbars with a 20mm T-track width.

expert reply by: Bryce D

0

Answer 1

Thule has an adapter designed specifically for this with the part #TH27PQ. This will convert the hardware of your Motion XT box so that it can attach to the top channels of a roof rack or a platform like you have.

view full answer...

Answer 2

I did some research, and the Yakima CBX Rooftop Cargo Box #Y66FR that you mention will not work with the Rhino-Rack Pioneer Platform Rack #RR77AB due to the clamps that come with the cargo box not being able to clamp around the wider bars, and that…

view full answer...

Answer 3

I called Thule and they do not have an official measurement spec available for this part. Because the reported measurement results are not consistent, I went to our warehouse and took a 9 piece sampling and measured the Thule Replacement Square…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 6

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 9

Tracks can absolutely be installed on the roof of your A.R.E. Truck Cap to provide a mounting system for a roof rack. For this I recommend the Yakima Tracks, which come in 42 inch #Y01126, 54 inch #Y01127, and 60 inch #Y01135 lengths. These tracks…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

The Malone Universal Crossbar System #MPG201 is a more economical choice but it still does a good job. The design and quality of Thule's system is why they have such a large difference in price. Whether you go with the Thule Crossroads system…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Will the T-Track Adapter for Thule Cargo Boxes Work With the Rhino Rack Recon Bars

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching