Will The Cub Tail Lights With Blind Spot Sensors Work With Steel Tail Light Protectors

Question

Question:

Will these sensors work if I have tail light guards. They are steel bars running horizontally over the tail light lens. I use the truck for work, I tow a lot and need the lens protected. I will ad photo of tail with guard.

asked by: Joseph H

0

Expert Reply:

The steel bars over your tail lights would set the sensors of the Cub Tail Lights with Blind Spot Monitoring System # CU22XR off constantly. You could try cutting a few bars off so that the majority of the bars are still there to protect the tail lights but the sensor will need to be free of obstructions in order to properly operate.

expert reply by: Kevin C

0

Tail light cage
(click to enlarge)

Answer 1

Since you have some obstructions on the side of the trailer preventing the main door from swinging all the way open you'll need to use an angled door keeper like the 45-Degree T-Style Hook and Keeper Door Holder part #37211765. Then for the…

view full answer...

Answer 2

What we have is a Hook and Keepr #PLR9-SS in stainless steel, #PLR9-A in aluminum, and #383400 zinc plated. These are used to hold trailer doors open similarly to how you are using a hook and chain. One piece is conneted to the side of the trailer…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Hi Jeff; thanks for the question and sturdy is definitely a good word for the etrailer tonneau that fits your 2022 Ram 1500 with a 5-1/2 foot bed, the etrailer Hard Tonneau Cover #e35DR. It's made of a fiberglass-reinforced plastic which is a…

view full answer...

Answer 5

There a few different ways to determine this. You can have a helper activate the turn signals, running lights and brakes. If a single bulb lights for each function (on each side of the car) then you have incandescent lamps. If you have LED's each…

view full answer...

Answer 6

When installing the pivot arms on your B&W Companion #BWRVK3400-5W you'll need to measure from the ground to the floor of your bed and from the ground to the plate of the pin box on the trailer down to the ground while it's level. The…

view full answer...

Answer 7

The bracket of the Replacement License Plate Kit for Yakima Rack and Roll Trailer #8880166 is made of plastic to keep weight down.

view full answer...

Answer 8

The difference is the color of the pin and clips of the two kits. The Patriot Adjustable Hitch Adapter part #PH67SR has black pin and clips whereas the #PH54FR has red ones.

view full answer...

Answer 9

The Patriot Hitches Adjustable Drop Hitch Receiver Adapter #PH67SR will not reduce the capacity for your 2021 Promaster City with a class III receiver.

view full answer...

Answer 10

I am not sure what you mean by double pin shock but we do have shock kits for 5th wheel trailers that are shown on the page I linked for you. A tandem axle 5th wheel trailer with a GVW of only 5000-lbs is pretty rare but trailers are getting lighter…

view full answer...

Answer 11

To flat tow your 2021 Chevy Colorado it'll need to be the 4WD model and you'll need to follow the steps listed under "Recreational Vehicle Towing" in your owner's manual to get your vehicle ready to tow. If you have 2WD you will…

view full answer...

Will The Cub Tail Lights With Blind Spot Sensors Work With Steel Tail Light Protectors

Featured Help Information

Miscellaneous Media

Continue Researching