Canister Dimensions for RetraxONE XR for 2023 Ford Maverick

Question

Question:

What are the canister dimensions for RTX83QR for a 2023 Ford Maverick?

asked by: Gary P

1

Helpful Expert Reply:

The dimensions of the canister on the RetraxONE XR Hard Tonneau Cover # RTX83QR are 13-1/2" deep x 12" tall. The canister runs the full length of the inside of the bed on your 2023 Ford Maverick.

expert reply by: Robin H

1

Answer 1

If you're wanting to have both a tonneau cover and ladder for your 2023 Ford Maverick then you'll need the RetraxONE XR Hard Tonneau Cover #RTX83QR for the cover. This comes with accessory t-slots that specific ladder racks, like the Yakima…

view full answer...

Answer 2

The folding covers do not have the T-slots you need to install the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack item #Y01151-5755. Those slots are only on the retractable covers like the RetraxONE XR Hard Tonneau Cover item #RTX83QR. The…

view full answer...

Answer 3

The best adjustable height ladder rack for your 2023 Ford Maverick that is compatible with a tonneau cover is the Yakima OverHaul HD part #Y01151-57555. This comes with adapters designed to fit the T-slots of the RetraxONE XR part #RTX83QR which is a…

view full answer...

Answer 4

For a tonneau cover that fits your 2024 Ford Maverick and is compatible with the Yakima OutPost HD Overland Truck Bed Rack item #Y01152-5755 you will need the RetraxONE XR Hard Tonneau Cover item #RTX83QR. This tonneau cover has the built in t-slots…

view full answer...

Answer 5

The TruXedo Lo Pro #TX53TV and Pro X15 #TX33TV are going to be compatible with a roof rack when you use the TruXedo Elevate Truck Bed Rack System #TX76NV on your 2022 Ford Maverick. Sorry for the confusion and I have sent in an update to have this…

view full answer...

Answer 6

Torque specs for wheel lug nuts will vary depending on the diameter of the lugs, type of lug nut and the wheel's material. The linked chart details the recommended torque for many combinations. Dexter Hub/Drum #84546UC3 has 1/2-inch studs and…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

The Tow Ready wiring harness #118571 is rated for 7.5 amps for brake lights and turn signals and 7.5 amps total for running lights. The fuse that goes on the power wire connection to the battery is a 10 amp fuse. The wire gauge of the long 12 volt…

view full answer...

Answer 9

The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…

view full answer...

Answer 10

On a 2005 Chevy Silverado 1500, If you are facing the front of the truck looking at the power distribution box, there will be a post at the back left side and a fuse slot near it. It is that fuse slot that you will install a 30 amp fuse. I have…

view full answer...

Answer 11

The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.

view full answer...

Answer 12

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Canister Dimensions for RetraxONE XR for 2023 Ford Maverick

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching