Replacement Front Cover for Solera Power Awning on 2018 Thor Four Winds 31Y

Question

Question:

Hello, I have a 2018 Thor Four Winds 31Y with a Solera awning. The cap on the left side of the awning broke off and I want to make sure I get the correct replacement. Here is a pic of the awning with the missing piece, along with the label of the awning company and pics of the corresponding piece on the right side that isn't missing. Thanks for your help!

asked by: Tom G

0

Expert Reply:

The drive head in your picture has the Regal style cover # LC643922. The correct replacement front cover for your idler head is the # LC643923.

expert reply by: Robin H

0

Regal Drive Head Cover on Solera Power Awning.
(click to enlarge)

Answer 1

Thanks for the photo and it does show the left side, which is the idler head side. I can verify for you that the you do have the correct replacement cover: - Replacement Cover for Solera Awnings - Idler Head - Front Cover - Black #LC643923 This will…

view full answer...

Answer 2

As you have the Lippert Edge awning you will need their corresponding covers. There is the Idler Front #LC37UD, Idler Back #LC73UD, Drive Front #LC32NJ and Drive Back #LC43UD

view full answer...

Answer 3

I took a look at the Replacement Cover for Solera Awnings #LC643923 that you're referring to, and I see the confusion! However, #LC643923 only has one hole as shown in the images I've attached, the squarer sized hole you're seeing in…

view full answer...

Answer 4

To remove the front cover #LC643923 from your Solera Awning there are indeed 2 screws that need to be removed. If you look at the back f the idler head unit you can see the locations where the screws reside that you need to remove. I have attached a…

view full answer...

Answer 5

The install of the Replacement Cover for Solera Awnings #LC643923 is pretty simple. It's basically held on with just two screws that you'll easily be able to locate on the old head you have now. Since this cover does not come with screws…

view full answer...

Answer 6

Yes, the Replacement Short Arm Assembly for RV Awnings part #LC404523 is correct for a Solera V000436372 Awning.

view full answer...

Answer 7

The Replacement Cover for Solera Awnings #LC643923 fits a Solera Awning idler head. There would also be a drive head. You can use the drive head and other parts of the awning to try and determine what awning that you have. If you are unsure, you can…

view full answer...

Answer 8

Thank you for the photos! It looks like you have the Regal Style awning head so for a replacement front cover you need part #LC643923 for the idler side. If there is a clip missing on the back cover then I recommend replacing that as well so the…

view full answer...

Answer 9

For your Solera Awning, you can use the Replacement Cover for Solera Awnings #LC643923 for the front, and the Replacement Cover for Solera Awning #LC643921 for the back. I have included a couple of videos for you to check out as well.

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

You are correct that this refrigerator does not have an ON/OFF switch or function. The best you can do is "Standby" that draws an unknown amount of power. One option is to pull the 12-Volt fuse at the RV power center. A much better option…

view full answer...