Correct Inner Bearings for Lippert 5K Axles On a 2008 Artic Fox Travel Trailer

Question

Question:

I need 4 wheel bearing kits for a 2008 arctic fox travel trailer 25p. Axle info lc l52-sb-86-67.75-spob-us-g-65516-7220. Serial-537180. 5000lb. 08/20/2007

asked by: Roy T

1

Helpful Expert Reply:

For the inner bearing, you're going to need the Replacement Trailer Hub Bearing # 25580, but for the outer bearing you are going to need to remove the hub and check to see what is stamped on the face of the outer bearing as it could be a couple of different options.

Once you have this information, feel free to get back to me and I'd be happy to find you the correct outer bearings as well.

expert reply by: Bryce D

1

Lippert 5K Axle
(click to enlarge)

Answer 1

Yes, the Grease Seals 10-36 part #RG06-070 are a direct replacement for the Dexter 010-036-00.

view full answer...

Answer 2

Based on the GVWR of your 2019 Jayco North Point 315RLTS it does seem like you have 7k axles. I recommend verifying this information to be sure. These axles typically use the #14125A outer and #25580 inner bearing found in the Timken #TMK92VR.…

view full answer...

Answer 3

I was able to cross reference the 031-17-02 bearing to a 14125A and the 031-030-02 to a 25580. For a replacement bearing/race/seal kit, you'd use part #BK3-200, which includes the 14125A outer bearing, the 25580 inner bearing, the 10-36 grease…

view full answer...

Answer 4

Timken bearing kits are made in the USA and they are much more reliable than other options. So since we know you have a 7k axle on your Forest River Riverstone the correct kit would be the part #TMK22VR.

view full answer...

Answer 5

I am sure we can help with what you need but I can't look up your axle number. Can you get me the capacity or diameter of it? That would be all that I need.

view full answer...

Answer 6

The correct Bearing Buddy seal set can be found by identifying your inner bearing and grease seal on your CMC-PC190H20 trailer. I have no way of knowing what bearings and seals are on your trailer so you will need to identify them. You can get the…

view full answer...

Answer 7

The 1.75 inch inner diameter for bearing is #25580, which is only used on mostly 7,000 lb to 10,000 lb axles, as opposed to a 3,500 lb camper. Additionally, there isn't a hub with that bearing along with a bearing that has a 1.25 inch diameter,…

view full answer...

Answer 8

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Hey Richard, thanks for reaching out! The Dexter DX7.5 Drop-N-Go Brake Actuator #099-175-00 is a great option for a replacement actuator because it's a direct replacement for the common Model 60 actuators that were popular in the '90s.…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

I am sorry but we do not have an AC cover with those dimensions. The closest option we have is the Replacement RV Air Conditioner Cover for Penguin and Dometic Air Conditioners item #AT3308046006 which measures 40-1/2" long x 29" wide x…

view full answer...

Correct Inner Bearings for Lippert 5K Axles On a 2008 Artic Fox Travel Trailer

Product Page this Question was Asked From

Continue Researching