Distance From Bottom of Coupler to Top Pin Hole On Gen-Y GY38GR

Question

Question:

Whats the distance from the bottom of the ball hitch to the top hole on the pinbox? thanks

asked by: Victor P

1

Helpful Expert Reply:

The distance from the bottom of the coupler to the top hole on the # GY38GR is 24.866". I have attached a helpful diagram below showing this measurement for your reference.

expert reply by: Robin H

1

GY38GR Measurement.
(click to enlarge)

Answer 1

Yes, it will as long as the opening around the the gooseneck ball is large enough that the pin can be inserted. The end of the Gen-Y Hitch 5th Wheel to Gooseneck Pin Box item #GY38GR is 3-1/2" x 3-1/4". You will need to have at least…

view full answer...

Answer 2

As long as the gooseneck ball is securely attached to the rest of the hitch the Demco Recon fifth wheel hitch part #DM8550046 can attach to it and work great. Doesn't matter if it's a screw-in style or a drop-in style.

view full answer...

Answer 3

The post of the #BWRVK3050 Companion 5th Wheel Hitch for flat bed trucks that installs into their Turnover Ball hitch is 4-1/8 inches long, and the slot in the post measures 3-1/2 inches long, as shown in the provided photo. The #BWRVK3050 is meant…

view full answer...

Answer 4

Fifth wheel rail kits need to attach directly to the frame of the truck. So what you are looking to do is technically possible, but would require some serious modification. For a flat bed fifth wheel hitch the Demco Hijacker SL part #DM6076SL-FLAT…

view full answer...

Answer 5

It looks like you are going to have to use an adapter like the Convert-A-Ball Cushioned 5th-Wheel-to-Gooseneck Adapter #CAB-C5G with your 5th wheel trailer. The Demco Recon Gooseneck-to-5th Wheel Trailer Hitch Adapter for Recessed Ball #DM8550046…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

Hey Mark, from previous customers we have determined that the your 2009 Coachmen Chapparal M-278 has a Lippert 1621 pin box so the Gen-Y Gooseneck adapter part #GY58GR would fit and work great on it. This will give you a cushioned gooseneck adapter.…

view full answer...

Answer 8

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from the…

view full answer...

Answer 9

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Hey Robert! Yes, the Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers #RM-2460-2570 can be used to replace the MORryde LRE suspension kit you currently have on your 2006 Keystone Montana. Just verify your axles have a 3"…

view full answer...

Answer 12

There should be a sticker or plate on the pin box itself that lists the manufacturer and model of the pin box. If it is not present then there are some measurements you can take to determine the model of the pin box. I have included a link that…

view full answer...