Does Inserting Key into Thule T2 Lock Unlock Locking Knob

Question

Question:

I my key into the locking knob but the key isn’t turning to create the knob to tighten so I take the rack off.

asked by: Paula

0

Expert Reply:

Did you turn the key in the knob before attempting to remove it? The knob doesn't automatically engage with just the key inserted.

expert reply by: Jameson C

0

Answer 1

We have the Draw Tite 2 inch hitch part #76128 as a fit for your 2019 Honda CR-V that does not require any fascia trimming and would be a great choice since it would work well with your 2 inch Thule bike rack and wouldn't affect your lease…

view full answer...

Answer 2

Yes, the Curt Trailer Hitch Receiver #C13397 can be installed on your 2024 Honda CR-V Sport Touring with that Honda Sensor Adapter and you'll be able to retain full use of the liftgate feature!

view full answer...

Answer 3

The first noticeable difference between the Draw-Tite #76128 and Curt #C13397 trailer hitch receivers for your 2019 Honda CR-V is the design and what it looks like after it is installed. The Draw-Tite looks like a standard trailer hitch where the…

view full answer...

Answer 4

The Curt Trailer Hitch Receiver #C13397 will be shipped in a box that measures 45x8x23 inches. The hitch sports a shipping weight of 30 pounds. I have attached an installation video on the 2019 Honda CR-V below that you can also check out.

view full answer...

Answer 5

The Thule T2 Classic, part TH9044 uses a 12 inch long strap as you mentioned. Thule does offer a longer replacement strap as part #8527642001. The strap is meant for Fat bikes, but it's 18 inch length will work with your 27.5 inch wheels…

view full answer...

Answer 6

I recommend the etrailer.com hitch receiver, part #E98848, because I like how the receiver tube is all you see under the bumper. The cross tube is completely hidden. It's also less expensive than some of the others available. All of the…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like…

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 12

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack…

view full answer...

Does Inserting Key into Thule T2 Lock Unlock Locking Knob

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching