Can Hellwig Sway Bar Fit with Fifth Wheel Rail Kit

Question

Question:

I have a 2007 Chevy 2500HD classic crew cab short box 4x4 with the 6.6 duramax. The truck has firestone air bags and a 4inch exhaust. I ordered the hellwig adjustable big wig rear sway bar to help with sway while pulling my fifth wheel. I can not tell from looking at pictures if the the clamps that go on the frame will clear my fifth wheel hitch mounting brackets on the frame. Do you know if this kit will work with the pullrite super glide hitch mounting? Can I take it out of the box and check the fit without installing it to see if it will fit and return it if it doesnt fit? If this wont fit what kit do you recomend? Thanks,

asked by: Trevor

0

Expert Reply:

Thanks for the picture of your fifth wheel rail brackets. Based on seeing that the Hellwig sway bar part # HE94MR would fit and there would be no clearance issues.

expert reply by: Jameson C

0

Silverado Frame Rail with Fifth Wheel Bracket
(click to enlarge)

Answer 1

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Answer 2

We do not offer replacement hardware for your OEM anti-sway bar for your 2005 Chevrolet Silverado, unfortunately, however, the Roadmaster Rear Anti-Sway Bar #RM-1109-167 is confirmed to fit your truck and would serve as aan excellent replacement…

view full answer...

Answer 3

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 7

The air suspension system on your 2022 Ram 2500 limits your options for suspension enhancement. None of the air bags made for your truck will be compatible. Instead, I recommend adding the SumoSprings Rebel Custom Helper Springs #SS64VR. The…

view full answer...

Answer 8

It sounds like the purpose of getting the air helper spring would be to counteract the 1 inch compression you're getting in your rear suspension caused by the pin weight of your 5th wheel. If that's the case, I believe that the AirLift 5000…

view full answer...

Answer 9

There's not many differences between the Air Lift WirelessONE item #AL25980EZ and item #AL25980. The main difference is that the item #AL25980EZ has a slightly higher CFM at 1.03 compared to 0.92 and it runs slightly more efficient at 9% over 15%…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Hey David, actually what is going to make the biggest improvement in handling and stability for your 2011 Itasca is an upgraded rear sway bar with the part #RM-1139-175. I know that's not what you asked about but for motorhomes where most of the…

view full answer...

Can Hellwig Sway Bar Fit with Fifth Wheel Rail Kit

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching