Correct Replacement Fenders for a Demco Kar Kaddy SS

Question

Question:

What are the correct replacement fenders for a 2005 Kar Kaddy SS. Demco #’s are 5736 and 5737 Thank you.

asked by: Kent H

0

Expert Reply:

For your Demco Kar Kaddy SS you're going to want the Replacement Fender Assembly for Demco Kar Kaddy 3 Tow Dolly # DM97FR for the passenger side and the Replacement Fender Assembly for Demco Kar Kaddy 3 Tow Dolly # DM37FR for the driver's side.

expert reply by: Bryce D

0

Answer 1

The correct fenders for a Demco Tow It 2 are: Passenger Replacement Fender #DM66MV Driver Replacement Fender #DM76MV

view full answer...

Answer 2

The matching driver side fender for the Demco Kar Kaddy 3 part #DM97FR would be the part #DM37FR.

view full answer...

Answer 3

The Replacement Fender Assembly for Demco Kar Kaddy 3 Tow Dolly - Passenger Side item #DM97FR you referenced and the Replacement Fender Assembly for Demco Kar Kaddy 3 Tow Dolly - Driver Side item #DM37FR can be modified to fit your 1999 Master Tow…

view full answer...

Answer 4

For the driver side you'd want the part #DM37FR and for the passenger side #DM97FR according to my contact at Demco who verified the dimensions you are in need of.

view full answer...

Answer 5

I was able to find the correct fenders for your Demco Tow-it 2 tow dolly, as the Replacement Fender #DM97FR will not fit your Tow-it 2. Passenger Replacement Fender #DM66MV Driver Replacement Fender #DM76MV

view full answer...

Answer 6

In order to get a ball mount that has effectively 0 inches of rise or drop you would need to get a Trailer Hitch Ball Mount, part #D-4, like the one you referenced that has a 2 inch drop, and then use a 2 Inch High Rise Ball, part #C40034. I attached…

view full answer...

Answer 7

We do have the the correct replacement fender, but the Replacement Fender Assembly for Demco Kar Kaddy 3 Tow Dolly - Driver Side #DM37FR will only work with the Kar Kaddy 3. The correct replacement is the Replacement Fender Assembly for Demco Kar…

view full answer...

Answer 8

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 9

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 10

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 11

The correct replacement master cylinder kit we have for your Demco setup is the part #DM5918 which comes with the lock out replacement.

view full answer...

Answer 12

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Correct Replacement Fenders for a Demco Kar Kaddy SS

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching