Inner Diameter Of The LaSalle Bristol Swivel Adapter # 344633216 Hub

Question

Question:

Hi, I need to find out what the exact inside diameter is for the non-threaded portion of part number 633216. Thank you!

asked by: Tim P

0

Expert Reply:

The non-threaded hub portion of the LaSalle Bristol Swivel Adapter for RV Sink Strainer # 344633216 has an inner diameter of 1-5/8" so that it can allow for a 1-1/2" pipe to slip into it. For this attachment you'll want to use LaSalle Bristol ABS Solvent Cement # 3447530889 to secure the pipe to the fitting.

expert reply by: Kevin C

0

344633216 Hub ID
(click to enlarge)

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 3

Yes, in order to set your trailer up for use with shore power you will first need an AC distribution panel. For this, I recommend a Progressive Dynamics Series AC Distribution Panel. In order to bring power into the panel you will also need a power…

view full answer...

Answer 4

The 15,000 Btu Furrion air conditioner is what I would recommend and what I have on my trailer. Since it is an enclosed trailer I'm guessing you want the manual distribution box. You can choose from the following based on color: -Furrion Chill HE…

view full answer...

Answer 5

In order to wire your cargo trailer for both 12 volt DC and 110 volt AC power you would need to install a AC/DC distribution panel and power converter which we currently do not offer. You would then wire the 12 volt power to the converter along with…

view full answer...

Answer 6

Aside from the six 15A or GFCI power receptacles (5 interior and 1 exterior) and the breakers/fuses, we have all the parts you need to complete your project. For the power inlet on the outside of your horse trailer you can use the Epicord 30 Amp…

view full answer...

Answer 7

Yes the SmartPlug RV Power Cord #SM86FR that you referenced will stay flexible when the weather is cold. This would not get difficult to wrap up if the temperature was to drop.

view full answer...

Answer 8

Short answer, yes you can convert from 30amp to 50 amp. It will be costly and require an electrician. Long answer, you will need to replace the power outlet with SmartPlug RV and Marine Power Inlet - 50 Amp - Stainless Steel #SM79FR. Then replace the…

view full answer...

Answer 9

We do have the panels separately. What you're looking for is the Go Power Overlander Expansion Kit - 200 Watt Solar Panel #34282182.

view full answer...

Answer 10

Hello, Phil. Yes, the bolts that go into the adapters at the end of the arms should be torqued. It looks like those are 5/16" grade 5 bolts so they should be torqued to 18 ft lbs. I have included the torque chart below for your reference.

view full answer...

Inner Diameter Of The LaSalle Bristol Swivel Adapter # 344633216 Hub

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching