Replacement Brake Assemblies For Lippert 4,400LB Axle

Question

Question:

Need brake parts for a 2018. LCI 4400 axel. Shoes and springs. LCI 85 68.5 NOSP OS L 655 7278 18PT V000297602 Whatever that all means.. What do you have available? Ty

asked by: Curtis

0

Expert Reply:

The Lippert Electric Trailer Brake Kit # LC66WD contains the Left # LC96WD and Right # LC46WD hand brake assemblies for a Lippert 4,400lb axle. We do not carry just the replacement shoes and springs for your axle.

expert reply by: Bud M

0

Answer 1

The correct hub and drum assembly replacement for your Lippert 4,400 lb axle is the #8-407-5UC3-EZ. This comes with bearings and a grease seal. If you need brakes as well you can use the #LC66WD, or for self-adjusting brakes #K23-478-479.

view full answer...

Answer 2

To replace the batteries of the TPMS Cap sensors included with the TST TPMS for RVs - Color Display - Signal Booster - 6 Tire Sensors #TST-507-RV-6-C you will need to use the included wrench to turn the nut on the sensor counter clockwise. That will…

view full answer...

Answer 3

There are a number of reasons why the brakes on your trailer may not be working. Lets start with the easiest things to check. First, check the vehicle and trailer connectors for corrosion. This can cause a short inside the connector and the brake…

view full answer...

Answer 4

By backing plates for your 2020 Grand Design Imagine 2600RB I assume you are referring to the electric brakes, and the correct replacement for those is the following: - Electric Trailer Brake Kit - 10" - Left and Right Hand Assemblies - 4.4K…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

To determine the size of the brake assemblies you need you have to measure the depth and width of the hub drum on the axle like what you see in the picture I attached. The most common size is 2-1/4 inch wide like the #T4071600-500 that you…

view full answer...

Answer 7

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 8

Hey Richard, thanks for reaching out! The Dexter DX7.5 Drop-N-Go Brake Actuator #099-175-00 is a great option for a replacement actuator because it's a direct replacement for the common Model 60 actuators that were popular in the '90s.…

view full answer...

Answer 9

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Answer 10

To determine the size of the hub assembly you need to purchase you have to determine which bearings are in the old assembly. If the old assembly has L44649 inner bearings, you would use the hub you chose #8-258-5UC1. If the inner bearings are marked…

view full answer...

Answer 11

I'd be happy to help you out, John! To replace the brakes on your 5th wheel trailer you need the etrailer Electric Trailer Brakes #AKEBRK-7-SA which come with a self-adjusting feature so once you initially set them up you won't have to adjust…

view full answer...

Answer 12

Depending on how the trailer was made, there will be a few spots you can check to identify the axle. First, if the trailer was pre-made by a specific company, you may be able to find this information in either the paperwork or on a placard somewhere…

view full answer...