Parts Needed to Install 84" x 49" Pioneer Platform Rack on a 2022 Ford F-450 Super Duty

Question

Question:

what do I need to mount the rr25tb to my 2022 ford super duty

asked by: Harmel

0

Expert Reply:

To install the 84"x49" Rhino-Rack Pioneer Platform Roof Tray # RR25TB on your 2022 Ford F-450 truck topper (since it will be too long to mount to the roof of your vehicle) you'll need the following:

- Pioneer Platform Roof Tray # RR25TB
- Quick Mount Legs # RRRLT600 AND # RRRLT600H
- 63" Long RTC-Style Roof Rack Tracks # RTC16

This gives you a track for your truck topper, and then 3 pairs of Quick Mount Legs to give the extra long rack better stability.

expert reply by: Jon G

0

Answer 1

The Rhino Rack Pioneer Platform #RR25TB does come mostly assembled, but there are some smaller pieces that do need to be installed to make the system complete, including the underside mounting bars and some odds and ends. I've linked a photo of…

view full answer...

Answer 2

Yes, the Rhino-Rack Pioneer Platform Rack - Factory Track Mount - 84" Long x 56" Wide #JA9084 will work with the Yakima Roof Tracks with adapter kits. I reached out to my contact at Rhino-Rack and confimed a fit for this platform rack and…

view full answer...

Answer 3

The Rhino-Rack RLCP Leg Kit for OEM Fixed Mounting Points - Pad Mount - Qty 6 RLCP02 are not compatible with the Yakima Track System, however, I do have a fit. The Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks -…

view full answer...

Answer 4

The square blocks included with Rhino-Rack track adapter kit #RRT-FK3 are 0.71 inches long, 0.51 inches wide, and 0.12 inches thick.

view full answer...

Answer 5

I do have an option for you but there would be no way to attach a Rhino-Rack Pioneer Platform Rack like part #RR52TB to the roof rack you have on your truck cap. The crossbars are not in the correct location spread wise and the internal channels are…

view full answer...

Answer 6

You'll have to purchase a half kit individually at that size, but we do carry the parts. To make this kit, you'll need: Rhino-Rack Quick Mount Legs, part #RRRLT600H Rhino-Rack Vortex Aero Crossbar, 54 inches, part #RRVA137B

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 12

Hey Alex, it sounds like you are looking for just the tracks of the Rhino Rack camper shell roof rack kit #Y02-480B which we do offer with the part #RTC16.

view full answer...

Parts Needed to Install 84" x 49" Pioneer Platform Rack on a 2022 Ford F-450 Super Duty

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching