Can The Roadmaster Brake-Lite Relay Kit Be Used In A 1995 Jeep Wrangler

Question

Question:

Does the RM88400 fit a 1995 Jeep Wrangler?

asked by: Jim B

0

Expert Reply:

The Roadmaster Brake-Lite Relay Kit for Towed Vehicles # RM-88400 is a universal fit item so you would be able to use it in a 1995 Jeep Wrangler.

expert reply by: Kevin C

0

Answer 1

Most likely you will not need a brake light relay for your 2015 Jeep Wrangler Unlimited. I recommend wiring the Wrangler first and checking to see if you need a brake light relay before installing it. You will want to connect the Jeep's…

view full answer...

Answer 2

If you have a flat tow wiring kit with diodes, then you need the Roadmaster #RM-88400 Brake Light Relay Kit. It is normal behavior for those lights not to work when the wiring kit is active. We want the towing vehicle (through the wiring kit) to…

view full answer...

Answer 3

Yes, most likely you did damage the relay. The good news is it's a very common automotive type relay you could take to a local car parts store and they'd be able to get you set up with a low cost replacement.

view full answer...

Answer 4

Since the brake lights of your 2021 Jeep Gladiator come on your when the engine is off, and because your Jeep has a combined lighting system - where the brake lights act as both the brake signals and the turn signals - you will in fact need a relay:…

view full answer...

Answer 5

The solution for your 2016 Jeep Wrangler flat towing situation is the RoadMaster Brake-Lite Relay Kit #RM-88400. The Brake-Lite Relay Kit will keep the your Wrangler's brake signal from overriding the turn signal which comes from your RV. I have…

view full answer...

Answer 6

Since the braking system you plan to install on your 2008 Jeep Grand Cherokee applies the brakes of the vehicle and the brake lights of your vehicle come on when you press the brake pedal you will need the brake light relay part #RM-88400 which is…

view full answer...

Answer 7

Yes, The Roadmaster Brake-Lite Relay Kit for Towed Vehicles #RM-88400 will work with your wiring system to ensure that your towed vehicle's turn signal lights flash in tandem with your RV's lights. Using this relay will not interfere with…

view full answer...

Answer 8

You can attach the Brake Lite Relay part #RM-88400 to the stoplight switch at the pedal like you mentioned.

view full answer...

Answer 9

All you need to do is look for the search box in the upper right hand corner of the page you're on. If there is no search box on the page you're on, click the etrailer.com logo in the upper left corner of the page. That will take you to the…

view full answer...

Answer 10

The Roadmaster brake relay kit #RM-88400 you referenced will prevent your 2014 Honda CR-V's brake signal from overriding the turn signal sent by your RV. It's only active when you depress the brake pedal. If the brake light relay isn't…

view full answer...

Answer 11

I spoke with my contact at Roadmaster regarding the issues you are having with the Brake-Lite Relay Kit #RM-88400 on your 2015 Jeep Cherokee. There are a couple possible reasons for why you are having trouble with the push-button start and also the…

view full answer...

Answer 12

Correct, you must turn on your motorhome's running lights/parking lights in order to get the Roadmaster Brake-Lite Relay Kit for Towed Vehicles #RM-88400 to work.

view full answer...

Can The Roadmaster Brake-Lite Relay Kit Be Used In A 1995 Jeep Wrangler

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching