Parts Needed to Flat Tow a 2014 Jeep Wrangler with a Towable Bumper
Question:
Towing a 2014 jeep Wrangler behind our MH, Need a tow bar and brake wiring kit, The bumper will accept a tow bar
asked by: Mike T
Expert Reply:
We have the parts you need to flat tow your 2014 Jeep Wrangler, but I do recommend checking to make sure your bumper is rated for flat towing - we've seen quite a few Jeep bumpers that have the tabs at the front but unless the company has rated that bumper for flat towing you'll need to get a base plate kit instead. Should your bumper be rated for flat towing here are the parts I recommend:
- Falcon All Terrain Tow Bar # RM-522
- Bumper Adapter # RM-035 (for 3/4" D-Ring mounts) OR # RM-035-1 (for 1" D-Ring mounts)
- Flexo-Coil Wiring Kit # RM-15267
- Brake Buddy Classic 3 Portable Supplemental Braking System # HM39494
- High-Low Adapter (see attached article)
It also looks like your battery will need to be disconnected for flat towing so if you'll be flat towing fairly often then I recommend checking out the Battery Disconnect with Switch # RM-766 as well since it makes disconnecting your battery as simple as pushing a button.
You'll also need some safety cables like part # RM-643 if you don't already have some.
Products Referenced in This Question
Brake Buddy Classic 3 Portable Flat Tow Brake System - Preset
- Tow Bar Braking Systems
- Brake Systems
- Pre-Set System
- Recurring Set-Up
- Portable System
- Air Brakes
- Air Over Hydraulic Brakes
- Hydraulic Brakes
- Brake Buddy
more information >
Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars - 3/4" Thick
- Base Plates
- Aftermarket Bumper Adapters
- Hitch Pin Attachment
- Roadmaster
more information >
Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars - 1" Thick
- Base Plates
- Aftermarket Bumper Adapters
- Hitch Pin Attachment
- Roadmaster
more information >
Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit
- Tow Bar Wiring
- Splices into Vehicle Wiring
- Diode Kit
- Universal
- Tail Light Mount
- Roadmaster
more information >
RoadMaster 68" Single Hook, Coiled Safety Cables - 6,000 lbs
- Safety Cables
- Coiled Cables
- 68 Inch Long
- 6000 lbs GTW
- Snap Hooks
- Coated Cables
- Roadmaster
more information >
Roadmaster Battery Disconnect with Switch for Towed Vehicle w/ Flat Tow Brake System - Gas
- Accessories and Parts
- Tow Bar Wiring
- Auto Battery Disconnect
- Roadmaster
more information >
Product Page this Question was Asked From
Roadmaster Falcon All-Terrain Tow Bar - Non-Binding - RV Mount - 2" Hitch - 6,000 lbs
- Tow Bar
- Hitch Mount Style
- Telescoping
- Steel
- 6000 lbs
- Fits Roadmaster Base Plates - Crossbar
- Fits Roadmaster Base Plates - Direct Connect
- Stores on RV
- Non-Binding
- Roadmaster
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Roadmaster Vehicle Specific Base Plates
- Article: Must-Have Flat Towing Components
- Article: How to Choose a High-Low Adapter
- Article: We Used 34 RV Tow Bars, and These are the Best for Flat Towing
- Q&A: Tow Bar To Attach To Warn Elite Bumper On A 2014 Jeep Wrangler
- Article: How Level Should a Tow Bar Be When Flat Towing
- Article: Trailer Wiring Diagrams
- Q&A: Comparison of Roadmaster Blackhawk 2 # RM-422 vs. Roadmaster Nighthawk # RM-677
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Which is Better Roadmaster or Blue Ox Tow Bar
- Q&A: Will The Curt Custom Base Plate Kit # C39ZV Fit A 2022 GMC Canyon AT4
- Q&A: Choosing Between the Brake Buddy Select 3 and the Blue Ox Patriot Supplemental Braking System
- Q&A: Can a 2017 Chevrolet Equinox Front Wheel Drive Be Flat Towed With all 4 Wheels On The Ground?
- Q&A: Recommended Direct Connect Base Plate Kit for a 2021 Jeep Wrangler and a Falcon All Terrain Tow Bar