Tow Bar Storage Cover For The etrailer SD Non-Binding Tow Bar

Question

Question:

I just installed this tow bar on my rv. trailer SD Non-Binding Tow Bar for Blue Ox Base Plates - RV Mount - 2 Hitch - 6,000 lbs Item # e47ZR I would like a cover for it what one will fit it

asked by: Guy G

0

Expert Reply:

The Demco Tow Bar Storage Cover # DM9523042 is a confirmed fit for the etrailer SD Non-Binding Tow Bar for Blue Ox Base Plates # e47ZR.

expert reply by: Kevin C

0

Answer 1

The #RM-032 will not hook to the front bumper of your truck. For your 1999 2 wheel drive Ford Ranger, you would need to purchase a base plate kit, tow bar, wiring and safety cables to tow your pickup behind your motorhome. We have the #483-1 XL…

view full answer...

Answer 2

Thank you for the pictures. The base plate kit on the 2007 Jeep Wrangler in the pictures, does not have any identifiable markings. But after comparing the pictures to the base plate kits that fit the 2007 Jeep Wrangler, it does appear to be a Blue Ox…

view full answer...

Answer 3

I reached out to Blue Ox to confirm which tab will be the correct replacement on your 2014 Honda CR-V, and you will need the Replacement Attachment Tab Assemblies for Blue Ox Baseplates - Short Front/Short Back #BLU57XR. This will replace both the…

view full answer...

Answer 4

While not specifically made for it, the etrailer SD Non-Binding Tow Bar item #e47ZR has a retracted measurement of 39-1/4". It will fit in the Blue Ox Tow Bar Cover item #BX88309 which measures 42-1/4" long.

view full answer...

Answer 5

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 9

The first thing you'll need to flat tow your 2015 Chevy Malibu LS is a base plate kit like the Roadmaster part #RM-523178-5 that is a confirmed fit. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting,…

view full answer...

Answer 10

Hey Ken, so the first thing you will need is a base plate kit like the Blue Ox part #BLU85CR which fits your 2023 GMC Canyon and would be compatible with your Blue Ox tow bar. I do not know what braking system you had in the past but for a permanent…

view full answer...

Answer 11

What you need is a light kit specifically for flat-towing. The Plug-N-Tow TM Vehicle Wiring Harness, #42615, would be if the Jeep were towing a trailer and not for activating its lights while it is being towed. There are a few options for lighting…

view full answer...

Answer 12

Since the 2024 Ford Escape is unchanged from the 2023 I see no reason you would not be able to use the Roadmaster Base Plate #RM77GR on the Hybrid trims. I recommend using the Roadmaster Nighthawk Tow Bar #RM-676 and the Accessory Kit #RM-9284-2 to…

view full answer...

Tow Bar Storage Cover For The etrailer SD Non-Binding Tow Bar

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching