Recommended Replacement Hub and Brake Assemblies for 2013 Interstate V-Nose Enclosed Cargo Trailer
Question:
Looking for replacement hub/bearing assemblies and brake assemblies for a 2013 Interstate V-Nose 16 ft Enclosed Cargo Trailer tandem axle. What do you recommend. They are the original 3500 lb axles.
asked by: Terry E
Expert Reply:
For your 2013 Interstate Enclosed trailer I recommend the # AKHD-545-35-K you were looking at. This uses # L68149 inner and # L44649 outer bearings which are standard on 3,500 lb axles. The bearings and seal are included and it is pre-greased so it's ready to go.
For brakes, check out the Electric Trailer Brake Kit # AKEBRK-35-SA. These fit 3,500 lb axles with a 4 bolt brake flange pattern and will work with the hub and drum assembly listed above. They are self-adjusting so you won't have to worry about keeping up with adjustments. If you need replacement hardware as well you can use the # BRKH10B.
Products Referenced in This Question
etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- etrailer
more information >
Mounting Hardware for 10" Brake Assemblies
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Hardware
- 10 Inch
- Redline
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Mounting Hardware for 10" Brake Assemblies
- Video: etrailer Hub And Drum Assembly Installation
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Shop: Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Q&A: Pre-Greased Idler Hub Assembly For a 2006 Interstate 6' X 10' Enclosed Trailer
- Shop: Brake Controller
- Video: etrailer Electric Trailer Brake Kit Installation
- Shop: Redarc Tow-Pro Elite Brake Controller for Tekonsha Harness - 2 Modes - 1 to 3 Axles - Proportional
- Q&A: Will a Dead Battery on a Breakaway Kit Cause the Vehicle to Not Be Able to Operate Trailer Brakes
- Search Results: 25580
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Trailer Wiring Diagrams
- Video: Choosing the Right Brake Controller
- Shop: Trailer Hitch
- Search Results: brake controller
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Suspension Enhancement
- Search Results: trailer brake controller
- Article: Most Popular Wheel Bearings
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement
- Article: Trailer Tire Sizing
- Search Results: equalizer
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: fender
- Article: How to Choose the Right Trailer Hitch Class