Will Tire Size of ST225/75R15 Fit On Steel Spoke Wheel # AM20534

Question

Question:

I would like to make sure that my spare tire size ST225/75R15 would fit properly on this rim. Please let me know. Thanks

asked by: Gerard K

0

Expert Reply:

Yes, the trailer tire size of ST225/75R15 will fit on the Steel Spoke Trailer Wheel # AM20534. If you were looking for a tire to fit this we have the part # AM10303 which is a Load Range E and rated for 81 mph.

expert reply by: Jameson C

0

Answer 1

We currently offer 2 15-inch galvanized wheels that may be a good fit for your Sure Load boat trailer. I linked the page for you to check out. It seems to me you need a 5 on 4-1/2 inch bolt pattern. I recommend the Americana Steel #AM20524 which is…

view full answer...

Answer 2

According to Dexstar, the Steel Spoke Trailer Wheel, #AM20524, has a capacity of 2,050 pounds at 75 psi. This is a 15 inch by 6 inch galvanized trailer wheel with a 5 on 4-1/2 bolt pattern. I have included a link to an FAQ article that explains how…

view full answer...

Answer 3

As you mentioned, we don't offer the #AM10245 205/75R-15 load range tire mounted on a rim because we don't have tire mounting equipment here, but you could purchase the rim separately and have a local tire shop mount them for you. We…

view full answer...

Answer 4

I spoke to my contact at HWT and they informed me that the PSI rating for their wheels like the part #AM20455 is limited by the valve stem and tire that is used in the wheel.

view full answer...

Answer 5

You can lock out your surge brake actuator although it's not always the prettiest of solutions. You need to either weld the pieces together or drill holes through it putting in bolts to keep it from moving. It'll work but it completely…

view full answer...

Answer 6

Your UFP surge actuator 34043 is a model A-60 actuator. This is designed for a 2" hitch ball and trailer weighing up to 7,500lbs. I have made a list of different bolt on couplers we carry below you can choose from to bolt in place of the…

view full answer...

Answer 7

I had the Demco Channel Tongue Trailer Coupler - Zinc - 2" Ball #DM12717 measured and included a diagram with the spacing you are looking for, and a little more if needed. With that being said, from the center of the first bolt hole to the…

view full answer...

Answer 8

The only difference between the Demco Channel Tongue Trailer Coupler part #12564 and Demco Channel Tongue Trailer Coupler part #DM12717 is the bolt pattern which is just slightly different with one having an extra hole.

view full answer...

Answer 9

I was able to go out to our warehouse to help you with the measurement for the latch on the Demco Channel Tongue Trailer Coupler - eZ-Latch - Zinc - 2" Ball - Bolt On - 10,000 lbs #DM13689-95. It is 7-1/4 inches from the top of the latch to the…

view full answer...

Answer 10

Hey Jon, so the Bearing Buddy seal kit part #BB60002 that you referenced is the correct fit based on your bearing numbers.

view full answer...

Answer 11

The Bearing Buddy Grease Seal Kit you referenced, part #BB60002 would be the appropriate replacement seal for your hub. It is compatible with your L68149 inner bearing and is the proper replacement for your existing 10-19 seal. The two most common…

view full answer...

Answer 12

Based on the dimensions you listed you would want the Grease Seal Set part #BB60002.

view full answer...

Will Tire Size of ST225/75R15 Fit On Steel Spoke Wheel # AM20534

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching