Troubleshooting Pairing Issues With A Voyager WiSight 2.0 Wireless Backup Camera System

Question:

We are not able to pair the Voyager digital wireless observation system wisight 2.0 We have a 2020 Micro Minnie Winnebego prewired for Voyager. Please help.

asked by: Marta

Expert Reply:

The Voyager WiSight 2.0 Wireless Backup Camera System w/ Night Vision for Prewired RV - 4.3" Screen # ASA24YR you were looking at is both the camera and the monitor and is the second generation of Voyager's camera systems. If you are trying to pair any parts of this system with the old system then that would be your issue since first generation and second generation cameras and monitors can not communicate with each other. I've attached the pairing process instructions below:

If you're trying to pair the camera and monitor from this kit and not getting it to function then you'll want to disconnect power to the camera and power up the monitor first inside of your tow vehicle. You can install the camera on the trailer but for some reason the pairing process is very specific that you do not power it until the monitor is ready.

1. Make sure the monitor is connected to 12 Volt DC power supply, but 12 Volt DC power is removed from the camera (clearance lights turned off).
2. Press the SEL/PAIR button on the front of the monitor expected mode & select the appropriate AV source.
3. Press and hold the "SEL/PAIR" button on the front of the monitor for 5 seconds and release. (Monitor will display "PAIRING")
4. Apply 12 Volt DC power to the camera (turn on the clearance lights). If pairing multiple cameras to the system, make sure that only the only the corresponding camera (Camera 1 –Camera 4 corresponding to Monitor's CH1- CH4) has power when pairing.
If done correctly, the monitor will display "PAIRING SUCCESSFUL". If pairing is not successful, the monitor will display "PAIRING FAIL". If you receive this message, repeat steps

If this doesn't solve your issue then let me know how far through the steps you can get and what is happening and also what your tow vehicle is because it could also be a lack of power coming from the tow vehicle to power the camera, thus giving you pairing issues.

expert reply by: Kevin C