Availability of 1/2 Inch Trailer Hub Studs and Trailer Coupler for 2-5/16 Inch Ball
Question:
I have trailer hubs with 1/2-13 lug bolts. I would like to change them out with studs and lug nuts for ease of maintenance. My current lug bolts are left hand and right hand threads respectively. I think these are the studs I need but im not sure. Thanx in advance. I have to purchase an 2-5/16 trailer coupler and 200 screws for the deck also.
asked by: Brian A
Expert Reply:
We have only 2 screw-in wheel studs with 1/2 inch diameter. First is # 25-53. It has an overall length of 2 inches, the lug nut end is 1-1/16 inches long fine threaded and the hub end is 13/16 inches long coarse threaded.
Then we have # 25-51 which is also 2 inches long overall. The lug nut end is 7/8 inches long fine threaded and the hub end is 5/8 inches long coarse threaded.
The coarse threaded ends may or may not fit your hub. You would have to test it to see. If they do not fit then you would have to replace the hubs. To replace the hubs I would need to know the inner and outer bearing numbers stamped into the metal of the bearings. I will also need to know the bolt pattern of the wheels, see link.
We have many 2-5/16 inch ball couplers. I have provided a link to them for you. There are many different designs available so I am certain we will have one that will work for your particular trailer set up.
For the screws I recommend a local hardware store because they will have a wider variety in terms of material, length, and design.
Products Referenced in This Question
Trailer Hub Wheel Stud, Screw-In, 1/2" x 2"
- Accessories and Parts
- Boat Trailer Wheels
- Trailer Hubs and Drums
- Trailer Tires and Wheels
- Wheel Studs
- 1/2 Inch Diameter
- Screw-In Stud
- 2 Inch Long
- Redline
more information >
Product Page this Question was Asked From
Replacement Wheel Stud, Screw-In, 1/2" x 2"
- Accessories and Parts
- Boat Trailer Wheels
- Trailer Hubs and Drums
- Trailer Tires and Wheels
- Wheel Studs
- 1/2 Inch Diameter
- Screw-In Stud
- 2 Inch Long
- Redline
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Replacement Wheel Stud, Screw-In, 1/2" x 2"
- Shop: Trailer Hub Wheel Stud, Screw-In, 3/4" x 2-1/2" LH
- Video: Wheel Stud Installation on a Boat Trailer
- Video: Redline Tires and Wheels 25-13-2 Review
- Article: Most Popular Wheel Bearings
- Article: Trailer Tire Sizing
- Q&A: Do all Fifth Wheel Rails have the Same Dimensions
- Q&A: Replacement Wheel And Tire Availability For A 205/75R14 Tire Size
- Q&A: Curt T-Connector Wiring Harness Taillight Connectors On a 2021 Jeep Grand Cherokee
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Q&A: Will The Trailer Wheel Bolt # RG02-020 Fit A Kenda KR25 Radial Trailer Tire & Wheel
- Q&A: What is the Trade-off Between Wider and Narrower Tires?
- Q&A: Availability Of Gunmetal Grey 14" Liger Wheel And Does It Come As A Combo With A Tire Mounted?
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Recommended Tire Chains for 35x12.5x20 Sized Tires on 2012 Ford F-250 4-Wheel Drive
- Article: Our Team Picked The Best Camping Gear of the Year - Here Are Their Top Choices