Is It Possible To Install LED Light Bar On The Thule Caprock TH76XE?

Question

Question:

Are there mounting solutions for mounting a led light bar to the Caprock? The stock Thule photo on your website shows a light bar mounted to the Caprock on the old defender.

asked by: Eric

0

Expert Reply:

Yes, you can mount an LED Light bar to the Thule Caprock # TH76XE you were looking at.

It has built in channels on the front and rear to allow track mounted light bar brackets, or you can use wrap around U bolt style brackets if you'd rather do that as well. It'll really come down to what brand light bar you decide on and what brackets it includes. We nor Thule sell one specific to this rack so it will take a little creativity.

expert reply by: Samuel C

0

Answer 1

For the Thule Caprock Platform Truck Bed Rack for Crossbars #TH65YE you can use the LED Light Bar Mounting Brackets for Rhino-Rack Pioneer Platform Rack #RR43173. This bracket kit will install into the T-Tracks on your platform rack and will…

view full answer...

Answer 2

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Yakima's Skyline towers part #Y53TR can fit the tracks of the Retrax XR that you have with the landing pad 1 part #Y00221 but there isn't a way with the Baseline towers. Your Yakima Corebar or Jetstream bars will work with the Skyline towers…

view full answer...

Answer 5

According to Rhino Rack, if you were to go with the shorter bars, you'll only have 1-1/4 inch of leeway on each side which isn't enough in their opinion. I'd recommend going with the 71 inch bars so you'll be certain of a good fit. As…

view full answer...

Answer 6

For your setup I recommend the TrackTowers for Yakima Crossbars and Platforms - Track Mount #Y52AV which includes everything you need to mount Yakima crossbars to your Retrax cover (unless you plan on using the Round or HD bars - then you'll need…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

I have a Yakima crossbar setup that is compatible with the Retrax Pro XR Tonneau Cover on your 2021 Toyota Tacoma, however, the Yakima Bedrock is not compatible and the 60" crossbars would be too short anyways. I recommend going with the…

view full answer...

Answer 9

The cross tube is visible on the Draw-Tite #DT55MR. This is true for all hitches that fit your 2024 Toyota Sienna. It is for that reason that I recommend the etrailer #e56RR instead. This hitch has a matte black powder coat finish which helps hide…

view full answer...

Answer 10

Hi Tracy, We can for sure get you a 3-bike rack for your ebike with a step-thru frame and two regular bikes. This is especially doable because your ebike is on the lighter side at just 40 lbs, and with that in mind what I recommend is a rack from…

view full answer...

Answer 11

For your 2024 Toyota Sienna XSE I recommend the etrailer Trailer Hitch Receiver #e56RR. This features a 2" receiver with a bolt-on installation. It has a 350 lb max tongue weight which should be more than enough for your bike rack and bikes. It…

view full answer...

Answer 12

Both the Curt #C22UR and the etrailer #e56RR trailer hitches are excellent options for your 2024 Toyota Sienna, but I actually like the etrailer option a little more and not just because it has our branding. The etrailer hitch has a matte black…

view full answer...