Underdeck Pontoon Ladder Option With 4 Steps

Question

Question:

Howdy Will front slide ladder fit a 2019 suntracker 20foot pontoon boat. JIF25FR Thanks

asked by: Keith M

0

Expert Reply:

There is a 4-step ladder for your pontoon boat but the part you mentioned is for tritoons so it won't fit. I'm not sure if you have a round or flat deck depending on which you have you can use one of the following:

- Jif Marine Underdeck Pontoon Ladder for Round Decks - 4 Steps - 48" Tall # JIF65FR

- Jif Marine Underdeck Pontoon Ladder for Flat Decks - 4 Steps - 48" Tall # JIF45FR

expert reply by: Kyle S

0

Answer 1

I would be happy to help! The differences between these two ladders is not that one is for flat front mounting and the other for a round front, instead the #JIF65FR is designed for pontoon boats with a round front, and the #JIF25FR is designed for…

view full answer...

Answer 2

I attached a diagram that shows the various dimensions of Sliding Under Platform Pontoon Boat Ladder - 3 Steps - 34-1/2" Tall - 400 lbs - Stainless Steel #315-FOG3. The mounting brackets measure 11-7/8" long, 12" from…

view full answer...

Answer 3

The 5 step #JIF52FR and the 4 step #JIF25FR will both fit your 2011 Godfrey Tritoon. This mounts underneath the deck so it won't matter that you have a curved front. Depending on where the supports are, and where you mount it, one of the…

view full answer...

Answer 4

Alright, I think we can help you out here with your questions regarding the Jif Marine pontoon boat ladders; first, let's start with the correct part numbers for the 4- and 5-step ladders so we're on the same page in that regard, and then…

view full answer...

Answer 5

I do have a solution for you, but the Aluminum Car Hauler Ramp Set #288-07503 that you referenced has a max height of 16" for loading equipment. I did speak with my contact at Gen-Y Hitch who said that their aluminum loading ramps don't have…

view full answer...

Answer 6

I believe you are referring to the 1" prongs on the Stallion Aluminum Car Hauler Ramp Set #288-07503 that are designed to grab onto the small gap at the end of most trailers. This not only provides a secure connection when loading/unloading, but…

view full answer...

Answer 7

The Jif Marine Underdeck Pontoon Ladder for Round Decks part #JIF85FR is a universal fit ladder therefore compatibility will be up to the installer. This model is designed for pontoon boats with rounded fronts so if this is what you have then odds…

view full answer...

Underdeck Pontoon Ladder Option With 4 Steps

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching