Is Hydrastar EOH Actuator HS381-8067 Compatible with OEM Controller in 2022-23 Toyota Tundra?

Question

Question:

Will the current gen 3 2022-2023 Toyota Tundra brake controllers work with the Hydrastar EOH actuator? Thank you

asked by: Jasin Y

1

Helpful Expert Reply:

I reached out to my contact at Hydrastra and they've not heard or experienced any issues with the Hydrastar EOH Actuator # HS381-8067 and the OEM controller on a 2022-2023 Toyota Tundra, so you shouldn't have any issues. Just make sure you go into the settings of your controller and change them to EOH (electric over hydraulic).

expert reply by: Samuel C

1

Answer 1

The HydraStar Marine Electric Over Hydraulic Actuator w/ Breakaway and 7-Way RV Harness #HS381-9067 is designed to work with an aftermarket electric over hydraulic brake controller. This kit will require you to wire in the components using the wire…

view full answer...

Answer 2

Since your 2014 Ford F-150 has the integrated brake controller the kit you would want is the part #HS481-8067 which comes with the correct adapter for that. That's the big difference between it and the part #HS381-9067 that you also mentioned.

view full answer...

Answer 3

We recommend the HydraStar kits as they are the most reliable and quickest reacting like the Hydrastar kit part #HS481-8067 which comes with everything needed to convert your trailer to work with electric over hydraulic brakes. Your integrated 2005…

view full answer...

Answer 4

Can you tell me what axle capacity the trailer has? I don't have the ability to look up trailer component info based on the VIN at this time.

view full answer...

Answer 5

The factory brake controller on your 2019 Ram 3500 is compatible with electric over hydraulic systems, so the one I recommend that will work perfectly with your Ram's controller is the HydraStar Vented Marine Electric Over Hydraulic Actuator for…

view full answer...

Answer 6

Since the mounting holes of the Demco Coupler part #DM15931-52 are 1/2 inch in diameter you'd want to source 1/2 inch diameter bolts Grade 5 or higher. Go with bolts and nuts long enough to fit through coupler.

view full answer...

Answer 7

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 8

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 9

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 10

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 11

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 12

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Is Hydrastar EOH Actuator HS381-8067 Compatible with OEM Controller in 2022-23 Toyota Tundra?

Product Page this Question was Asked From

Continue Researching