What Tool Can Be Used Remove and Replace the Quick Connect Valve for D&W Inc. Spray-Away Hose System

Question

Question:

What size socket is needed to remove/replace the quick connect valve?

asked by: Todd

0

Expert Reply:

To be completely honest, I am not sure what size socket you would need for the Replacement Quick Connect Valve for D&W Inc. Spray-Away RV Exterior Hose System # PF247008. Personally, I would just use an adjustable wrench.

Maybe you have the socket needed, but most people have an adjustable wrench. Not everyone is going to have a socket large enough and deep enough to clear the quick connect portion for a socket to be useful.

expert reply by: Scott S

0

Answer 1

Quick connect style valves like the #PF247008 you referenced can be a bit challenging. I've found that the trick is getting the sleeve pulled back as far as possible and what gets in the way is tension in the mechanism. Sometimes you have to push…

view full answer...

Answer 2

The Replacement Spray-Away Quick Connect Valve - Female part #PF247008 is the replacement quick connect valve for the D&W Inc Self-Storing Spray-Away Unit part #PF147008. If the valve is leaking you most likely have some debris or dirt stuck in…

view full answer...

Answer 3

While we have the measurements of the exact ground clearance height for our hitches we carry for a 2022 Toyota Sienna, we do have available measurements for a 2021 model. While these are not exact, the measurements will not deviate much from the…

view full answer...

Answer 4

The Replacement Quick Connect Valve without the plastic cover for the D&W Spray-away unit part #PF147005 is part #PF247008. The price is on the product page.

view full answer...

Answer 5

The Replacement Hose for D&W Inc. Spray-Away RV and Marine Self-Storing Unit part #PF267003 comes with a 3/8" quick-disconnect fitting. It is designed to be used with the D&W Inc. Spray-Away RV Exterior Hose System part #PF147007. If you…

view full answer...

Answer 6

The Replacement Quick Connect Valve for D&W Inc. Spray-Away RV Exterior Hose System - Qty 1 #PF247008 has a 1/2" threaded female connection and is designed to work on the D&W Inc. Spray-Away RV Exterior Hose System - 5-1/2" Square -…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 11

The trailer brakes work on a separate circuit than the lights. You have a couple of options to control the electric brakes on the trailer. One option is to use an air over electric brake control, #HA100400C. This unit connects to the air brakes on…

view full answer...

Answer 12

Hey Travis, congrats on the new 2024 Jayco Flight 284BHS! Your travel trailer looks to have a GVWR of 7,950 lbs so I recommend going with the Equal-i-zer Weight Distribution w/ 4-Point Sway Control #EQ37121ET and pairing it with the Shank…

view full answer...