Should Heat Sink of Jensen RV Stereo Get Warm/Hot

Question

Question:

Jwm90 static sound in all speakers checked connections seem to be fine but noticed this piece getting hot

asked by: Dirk T

0

Expert Reply:

What you sent in your picture is the heat sink and is normal to get hot as it is designed to dissipate heat so there's no concern there. If you are hearing static through the speakers that most likely means your antenna isn't connected so there's no signal for it to pick up.

expert reply by: Jameson C

0

Heat Sink
(click to enlarge)

Answer 1

In order to use the the DVD playback feature on the Jensen Stereo part #JWM60A you would need to obtain a set of RCA cables which run from the back of the stereo (red,yellow,white) to the back of the TV you will be using to play the DVD. This unit…

view full answer...

Answer 2

On the side of the Jensen RV Stereo #JWM60A there is a small recessed section that you will use to safely remove the trim pieces. You can use a flat head screwdriver to gently pry the trim panel away from the unit at this location. I have attached…

view full answer...

Answer 3

For an upgrade over the Drive stereo you have now the Jensen Stereo part #JWM60A that you referenced is our best choice. It essentially has all of the same features as the Drive while being a bit more reliable. It's designed for RV in-wall…

view full answer...

Answer 4

I recommend the Jensen RV Stereo #JWM60A to replace your Jensen Voyager AWM900 in your RV. This has almost identical overall dimensions (10-7/16" wide x 7" tall x 6-1/2" deep) and mounting dimensions (9" wide x 6" tall x…

view full answer...

Answer 5

I reached out to my contact at Jensen and he did say that your AWM975 model stereo has been out of production for a while. To replace the unit he said the best option is with the Jensen RV Stereo #JWM60A, which features the same cutout size and…

view full answer...

Answer 6

For your replacement stereo, I recommend the Jensen Stereo -AM/FM - CD/DVD - USB - Bluetooth #JWM60A. It as rough opening dimensions of 9 inches by 6 inches by 5-1/2 inches and is the best option for a replacement in my opinion. It will be a nice…

view full answer...

Answer 7

The Jensen RV Stereo AWM965 is not Bluetooth compatible nor am I aware of any adapter that would give the device this feature. Therefore, the best option would be to upgrade with the Jensen RV Stereo part #JWM60A. The Jensen JWM60A like the Jensen…

view full answer...

Answer 8

We do have replacement options for the Jensen JRV9000 though they are not touchscreen or video compatible. The JRV9000 is a double din so you will need to replace it with such like the Jensen RV Stereo part #JWM60A which is a more basic model. The…

view full answer...

Answer 9

The iRV RV Stereo, #IRV64FR is a Double DIN with HDMI, AUX, Bluetooth and App Control. This requires a cut out of 6-11/16" wide x 3-15/16" tall x 6-11/16" deep. This replacement stereo option will be closest to an exact fit for the cut…

view full answer...

Answer 10

The Jensen RV Stereo part #JWM60A would be an excellent replacement option for the Jensen RV Stereo part AWM910. The cutout size needed as well as the mounting hole locations are virtually identical between the two units so this part of the process…

view full answer...

Answer 11

Both the Jensen JWM6A and the current model, part #JWM62A are classified as double-DIN head units, which will both use the same sized rough openings in a vehicle dash. The old #JWM6A and the current model #JWM62A both use the same pigtail, as you can…

view full answer...

Answer 12

The Magnadyne RV5090 is definitely a giant brick so you'll want to go with a Double Din option like the Jensen RV Stereo w DVD Player #JWM60A to maintain the same footprint. The cutout dimensions I could find for it were 9-1/4" W x…

view full answer...

Should Heat Sink of Jensen RV Stereo Get Warm/Hot

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching