What Tonneau Covers is TruXedo Elevate Bed Rack Compatible With on 2021 Ford F-150 w/ 8 Foot Bed

Question

Question:

Wondering if the truxedo elevate truck bed rack will fit with this tonneau cover?

asked by: David F

0

Expert Reply:

You didn't mention what tonneau cover you were referring to, but for your 2021 Ford F-150 with an 8 foot bed, here are the tonneau covers compatible with the TruXedo Elevate Truck Bed Rack System # TX66NV:

- TruXedo Pro X15 Soft Tonneau Cover # TX1498701
- TruXedo Lo Pro Soft Tonneau Cover # TX598701
- TruXedo Sentry Hard Tonneau Cover # TX1598701
- TruXedo Sentry CT Hard Tonneau Cover # TX1598716
- BAK Revolver X2 Hard Tonneau Cover # BAK49FR
- BAKFlip MX4 Hard Tonneau Cover # BAK66FR
- BAKFlip G2 Hard Tonneau Cover # BAK36FR

I like the TruXedo options as they offer the most overall value, so that's what I would go with.

expert reply by: Kyle S

0

Answer 1

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 2

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 3

I wouldn't attempt to put a rubber mat between the truck bed and the base of the Demco Recon hitch part #DM8550045 as that would diminish how much the bed supports the hitch by the base and would put more stress on the center post attachment.…

view full answer...

Answer 4

Hey Brian, sorry about the confusion! So the t-slots of the Pace Edwards Full-Metal JackRabbit #PE36CV are compatible with the "non-commercial" ladder racks as well like the Yakima Overhaul for Tonneau Cover Rails #Y01151-5755. The T-slots…

view full answer...

Answer 5

Hey Don, good question and I checked directly with Air Lift for you and can confirm that so long as your 2024 Ram 2500 Rebel does NOT have the factory auto-leveling air suspension, the air bags you asked about are indeed a fit: - Air Lift LoadLifter…

view full answer...

Answer 6

Air bags like the Air Lift LoadLifter 5000 #AL88289 should be filled to a minimum of 5 PSI at all times. Filling them beyond that is done after the truck is loaded. The steps will go as follows: 1. Inflate air bags to at least 5 PSI 2. Load…

view full answer...

Answer 7

It sounds like the purpose of getting the air helper spring would be to counteract the 1 inch compression you're getting in your rear suspension caused by the pin weight of your 5th wheel. If that's the case, I believe that the AirLift 5000…

view full answer...

Answer 8

I feel the Air Lift LoadLifter 5000 Ultimate Air Helper Springs #AL88289 is the best option for your 2024 Ram 2500. These allow you to adjust the air pressure in the springs to reduce rear end sag and dial in your ride quality. These air springs have…

view full answer...

Answer 9

The Air Lift LoadLifter 7500 XL Air Helper Springs #AL57531 will fit your 2022 Ram 3500 Mega Cab with single rear wheels. This is the extra heavy duty 7,500 lb kit so it is most commonly used on dually trucks, but it will fit single rear wheel models…

view full answer...

Answer 10

Hey Brian, the Truxedo Elevate Ladder Rack part #TX46NV that you referenced is compatible with your Thule roof cargo box but you will also need the T-slot adapter part #TH27PQ which adapts the hardware to fit directly to the slot on top of the load…

view full answer...

Answer 11

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 12

If you're hoping to not affect the ride quality of your 2020 Ram 2500 while it is unloaded, then I recommend going with the Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers, part #AL88289. The 7500 XL, part…

view full answer...

What Tonneau Covers is TruXedo Elevate Bed Rack Compatible With on 2021 Ford F-150 w/ 8 Foot Bed

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching