Replacement Gooseneck Ball For Factory Prep Package on 2022 Ram 3500

Question

Question:

Your website says my 2022 Ram 3500 is not a confirmed fit for this product but your description says it is made for my truck. Will this product fit? RP19311

asked by: Mike

0

Expert Reply:

We have the correct gooseneck ball for your 2022 Ram 3500, but the correct one is different; what you need is the following:

- Curt Ball and Safety Chain Loops Kit for Ram Underbed Gooseneck Hitch # C60618

expert reply by: Kyle S

0

Answer 1

Although we do have gooseneck balls to fit the 2021 Ram 2500 factory puck system like the B&W Ball and Safety Chain Kit #BWGNXA2062, we do not have any with a built in rise. The top of this ball will sit 5-3/4" above the bed surface on your…

view full answer...

Answer 2

The B&W ball, part #BWGNXA2062, will sit higher off the truck bed by about 1-1/4 inches when compared to the Curt #C60618. If the B&W's height helps your trailer sit more level then it may improve your set up but that slight difference…

view full answer...

Answer 3

I recommend at least 6" of clearance from the top of your bed rails on your 2021 Ram 3500 to the underbelly of your gooseneck or 5th wheel trailer. If using a gooseneck trailer and if you have the factory in bed prep/puck system there are…

view full answer...

Answer 4

First thing you are going to want to do is spray liberal amounts of lube between the collar and hitch ball, around where you think the retention balls would be. WD40 usually does the trick. Then let this sit for an hour or so or overnight if you can.…

view full answer...

Answer 5

The tallest gooseneck ball we have available for the factory puck system on your 2019 Ram 3500 is the B&W #BWGNXA2062. The top of the ball will sit 5-3/4" above the bed surface on your truck. This is about a 1/2" taller than the next…

view full answer...

Answer 6

The B&W Ball and Safety Chain Kit #BWGNXA2062 will sit 5-3/4" above the gooseneck ball hole on your 2020 Ram 3500. You will need to add or subtract any difference in the bed height from the top of the bed rails to the top of the gooseneck…

view full answer...

Answer 7

That's a good question, and there are just a couple differences between the Curt Ball and Safety Chain Loop Kits #C58CR and #C60618, which are the capacities of the kit, and the height of the hitch ball. - 38,000 lb Capacity, 1-5/8" Rise in…

view full answer...

Answer 8

The latching mechanism of your gooseneck trailer coupler needs to wrap around the neck of the hitch ball and does not latch to the top of the ball your like your picture and description implies. You would not be safe to continue to tow like this as a…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

Yes, it will! The 5" Offset Gen-Y Hitch Gooseneck Trailer Hitch item #GY43XR is specially designed to work with the Ford factory puck system. It will push the connection point for the gooseball and your cattle trailer back 5" towards your…

view full answer...

Answer 12

The best way to prevent any clearance issues with your 2022 KZ Durango Gold G356RLQ and your 2020 Chevrolet Silverado 2500 with 6-1/2' bed and factory puck system is by using the Demco Autoslide 5th Wheel Hitch #DM79GV. This hitch slides back and…

view full answer...

Replacement Gooseneck Ball For Factory Prep Package on 2022 Ram 3500

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching