Replacement Options For a Trailer Hub With Inner Bearing L44643 and Outer Bearing LM11749
Question:
I also have a hub with an inner bearing of l44643 race l44610 and an outer of lm11749/lm11710 WITH A 5 on 4.5 hub. seal # is 474276 Is there a replacement hub with bearings to fit this description??? all numbers given are national I cant seem to find a replacement. I cant even find the outer bearing on this site. and help would be greatly appreciated.
asked by: Jessica S
Expert Reply:
Your spindle and parts for it are going to be obsolete. I recommend replacing it with the more common BTR Spindle # TRU44FR. This particular spindle will allow you to use the Hub # AKIHUB-440-2-EZ-2K with 4 on 4" bolt pattern or a Hub # AKIHUB-545-2-EZ-2K with a 5 on 4-1/2" bolt pattern.
Products Referenced in This Question
Easy Grease Trailer Idler Hub Assembly for 2K Axles - 4 on 4 - L44649 Bearings - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- Pre-Greased
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- etrailer
more information >
Easy Grease Trailer Idler Hub Assembly for 2K Axles - 10" to 12"- 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- Pre-Greased
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
BTR E-Z Lube Spindle for 2,000-lb Trailer Axles - 1-1/4" Diameter
- Trailer Spindles
- EZ Lube Spindle
- 1-1/4 Inch Diameter
- Round
- For 2000 lb Axle
- TruRyde
more information >
Continue Researching
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Article: Most Popular Wheel Bearings
- Q&A: Where to Find Serial Number of Truxedo Tonneau for Replacement Tarp
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Q&A: Weight Capacity of Dexter P-12 SLR SN: D5287869 Axle
- Q&A: Replacement Hub and Spindle for Dexter 69-46 Axle
- Q&A: Which Grease Seal for Trailstar Boat Trailer
- Q&A: Recommended Grease Seal w/ a 1.25 ID and a 1.98 OD
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Maintenance Schedule
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Wiring Diagrams
- Article: Rust Prevention
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs