How Much Does Superwinch SX10SR Integrated Off-Road Winch Weigh

Question

Question:

How much does it weigh?

asked by: Kevin M

0

Expert Reply:

The weight of the Superwinch SX10SR Integrated Off-Road Winch # SW39GR is 67 lbs.

expert reply by: Robin H

0

Answer 1

I do have an option for you to install a winch on your 2021 Ford Bronco but not on the front as we don't have any mounting solutions for this. That said, what you can do is use a rear trailer hitch as an attachment point for a winch. If you…

view full answer...

Answer 2

I did some checking and it looks like your 2012 Honda Fit with an auto transmission can be flat towed behind a motorhome but you have to be sure to follow all procedures outlined in the owners manual of the vehicle. I would recommend the Roadmaster…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

I recommend using a Winch #SW39GR with the Hitch Mount #BDW20011. This way you only need a 2" receiver which is typically already on the rear of most trucks and are available for the front. For your tilt trailer you can weld on a Receiver…

view full answer...

Answer 6

For your enclosed trailer the Bulldog Winch Trailer Winch part #BDW15020 would be a great option for pulling in your drag truck as it has a 4,400 lb capacity and was designed for this type of application. Or if you wanted something that would work a…

view full answer...

Answer 7

In order to carry a gas scooter on the front of a 2019 Ford F-150 you'll need to start with a front mount hitch, the Curt Front Mount Trailer Hitch Receiver part #C31083 is a great option. Then, in order to secure the scooter I recommend using…

view full answer...

Answer 8

Yes, the Bulldog Winch Hitch Mounted Winch Mounting Plate with Handles part #BDW20011 will work with the Warn Electric Winch M12 as they both use the same industry standard winch mounting hole spacing which is 4-1/2" wide x 10 long.

view full answer...

Answer 9

It is possible to add an additional camera to your trailer being pulled by your RV and have it display on your existing monitor, but it comes down to which system you have installed in your RV. The VueSMART RV and Trailer Backup Camera - Wireless -…

view full answer...

Answer 10

Superwinch does make a wiring kit for your #SW1455201. The Superwinch Front Wiring Kit #SW69GR uses 2 gauge wire and has a quick disconnect to match the one you have. However, this is only 5' long so you will need additional 2 gauge wire to…

view full answer...

Answer 11

For the Dexter 10K axles a 5/8" wheel nut #95188.

view full answer...

How Much Does Superwinch SX10SR Integrated Off-Road Winch Weigh

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching