Why Can't Saris Freedom Superclamp Bike Rack be Used at Rear of Travel Trailer

Question

Question:

Hello. Can you use this on a travel trailer with a frame mounted hitch? If not, can you explain why not and which product you would recommend? I currently have a Yakima rack but its old and the straps contact the paint of the bikes. Looking for a different option. Thank you!

asked by: Bryan J

0

Expert Reply:

Not all bike racks can handle the much rougher ride quality at the rear of travel trailers due to the less sophisticated suspension and longer distance between the rear axle and rear of trailer. The Saris # SA4025F is one of those bike racks but for a similar option that would work great we have the Kuat Transfer V2 part # KU84FR which would work well for you.

expert reply by: Jameson C

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 4

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 5

Hey Dave, so the best option for carrying your carbon frame bike and e-bike is the Swagman Escapee part #S39SR with the ramp #S59SR . It has the capacity for carrying an e-bike, is rated for travel trailer use, only touches the bikes by the tires…

view full answer...

Answer 6

Yes, you can install a Curt Trailer Hitch Receiver #C11433 on your 2019 Chevrolet Spark. This receiver is capable of supporting up to 200lbs of tongue weight. With each of the Lectric 3.0 e-bikes weighing roughly 60lbs without the battery you will…

view full answer...

Answer 7

When the Kuat Transfer V2 Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches #KU74FR is in the folded position with the shank also folded upright, it measures 46-3/4" wide and 30-5/8" long (see attached photo). In case you were…

view full answer...

Answer 8

Thank you for your purchase of the Kuat NV 2.0 Bike Rack #NV22G! When it comes to lighting I have an alternate solution to what you're asking with the following parts: Curt Auxiliary LED Indicator Lights - #C53201 Thule License Plate Holder for…

view full answer...

Why Can't Saris Freedom Superclamp Bike Rack be Used at Rear of Travel Trailer

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching