Weight Distribution Hitch With 1,000 lb Capacity

Question

Question:

I have an older Draw-Tite WD hitch rated at 7500 GW and 750 TW for the bars is there a 1000TW rated bar that will work? These bars are straight on the ends where the u-bolt and chain attaches.

asked by: Ken S

0

Expert Reply:

There is not; you'd have to go with a new weight distribution hitch with a 1,000 lb capacity such as the Curt MV Weight Distribution System # C17052 or Curt TruTrack 2P Weight Distribution System # C69JR.

expert reply by: Kyle S

0

Answer 1

Thanks for the picture! The Curt TruTrack 2P Weight Distribution System w/ Sway Control item #C69JR will work with your 7,000 lbs Jayco 267BH. The Curt TruTrack has an 800 lbs to 1,000 lbs tongue weight range. The built in sway control will help to…

view full answer...

Answer 2

When it comes to installing a weight distribution system on your 2021 Forest River Cherokee Alpha Wolf Travel Trailer being as close to the trailer weight is the best. I recommend The Fastway e2 Weight Distribution w/ 2-Point Sway Control - Round -…

view full answer...

Answer 3

Hi Emily, Before buying anything you'll want to verify that both the Pilot and the trailer hitch installed on it are rated for use with a weight distribution hitch (WDH). From what I can see Honda does not recommend it because it can shift the…

view full answer...

Answer 4

I reached out to Curt who informed me you will have to get a whole new weight distribution to upgrade to the Curt TruTrack 2P #C69JR. They said the Spring Bar #C86BR will not fit into your Head 17107. So you would only be able to reuse your hitch…

view full answer...

Answer 5

Generally speaking, it is not advisable to reverse a trailer when using a weight distribution system. The system won't blow up but if you reverse at too sharp an angle then you can damage the head so you have to do so in a pretty straight line or…

view full answer...

Answer 6

I attached a picture that has the lighting codes of the Camco RV Power Defender, part #CAM55312 explained. Two yellows mean correct wiring, one yellow most likely means you have an open ground on the outlet at your house. Is there another outlet you…

view full answer...

Answer 7

Based on the weight of the 2022 Grand Design Imagine XLS 23BHE I was able to find online the Curt TruTrack weight distribution system part #C69JR would be a great option. With that said it seems to weigh more than what your truck is rated for so…

view full answer...

Answer 8

If you have a compatible 2-5/16" ball and shank already from your #C69JR, the replacement you need is the Curt TruTrack 2P Weight Distribution System w/ Sway Control - No Shank #C79JR. This comes with everything you need in order to mount the…

view full answer...

Answer 9

Yes, the Curt TruTrack 2P Weight Distribution System #C69JR will allow you to back up when installed. If you have any further questions please feel free to reach back out to me anytime and I would be more than happy to further assist you.

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Hey Dennis, we have a replacement 7-way plug with the part #A7WCB which would work great to replace your damaged one. I attached a diagram for 7-ways for you to check out as well.

view full answer...

Weight Distribution Hitch With 1,000 lb Capacity

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching