How to Determine if a Shorter Weight Distribution Shank Can Be Used
Question:
The hitch pin hole on my 2” WD shank was 11or 12 inches, the 2.5 “ shanks are 8” , will this be an issue ?
asked by: Bob D
Expert Reply:
Whether the 8' distance from the hitch pin hole to the adjustment holes on the Equal-i-zer Weight Distribution Shank # EQ94FR will be an issue or not is dependent on your truck and trailer set-up. There is not a clear yes or no, it depends on the clearances you have.
If you are utilizing the whole 11" or 12" that your 2" hitch shank has, then the 8" distance would not be adequate. If you have room to spare between your truck and trailer with your current shank then the # EQ94FR may work just fine. Unfortunately, there is not a way for me to know this and you would need to measure the clearance between your truck and trailer with your current system hooked up to know if you can use a short shank or not.
Product Page this Question was Asked From
Equal-i-zer Weight Distribution Shank - 12" Long - 13" Rise, 9" Drop
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- Fits 2-1/2 Inch Hitch
- Equal-i-zer
- Square - 9 Inch Drop
- Square - 12 Inch Rise
- Equal-i-zer
more information >
Continue Researching
- Search Results: 25" shank
- Q&A: Why Are There Long Holes on Side of etrailer Magnetic 2-1/2" to 2" Hitch Receiver Reducer Sleeve
- Shop: etrailer Magnetic Hitch Receiver Reducer Sleeve - 2-1/2" to 2" Hitch - 5" Long
- Shop: Equal-i-zer Weight Distribution Shank - 12" Long - 13" Rise, 9" Drop
- Shop: Fastway e2 Weight Distribution Shank - 12" Long - 12-1/2" Rise 9-3/4" Drop - 1.2K TW
- Shop: Equal-i-zer Wt Distribution Shank - 12" - 13" Rise, 9" Drop - 600 to 1,400 lbs TW
- Shop: Curt Weight Distribution Shank for 2.5" Hitches - 9-1/4" or 10" Drop - 13" Rise
- Search Results: hitch reducer
- Search Results: 7 pin plug holder
- Search Results: eaz~lift
- Shop: Trailer Hitch Reducer and Extender - 2-1/2" to 2" Trailer Hitch - 7" Long
- Shop: Curt Welded Weight Distribution Shank 7" - 10 Hole Adjustment
- Article: How to Measure for Trailer Hitch Drop
- Video: etrailer Magnetic Hitch Receiver Reducer Sleeve Review
- Shop: Trailer Hitch
- Search Results: 25580
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Trailer Wiring Diagrams
- Video: Choosing the Right Trailer Wiring
- Shop: Trailer Wiring
- Search Results: 90160
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Does Truck with 6-1/2 ft bed Have to Use Slider Hitch for Turning Clearance with Fifth Wheel Hitch
- Video: Adco Olefin HD All-Climate and Wind RV Cover Review
- Shop: Brake Controller
- Search Results: stl72rb
- Article: How to Choose the Right Trailer Hitch Class
- Shop: Suspension Enhancement
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector