Black Center Cap For Aluminum Sendel Series T07 Black Machined Trailer Wheel # AM25DR

Question

Question:

I lost a center cap during transit. I have these wheels and Im looking for a replacement cap. Can you recommend a black center cap? Aluminum Sendel Series T07 Black Machined Trailer Wheel - 14 x 5-1/2 Rim - 5 on 4-1/2 Item # AM25DR

asked by: Ben

0

Expert Reply:

The Replacement Center Cap # CXF106B is currently our only black center cap which will fit the Aluminum Sendel Series T07 Black Machined Trailer Wheel # AM25DR. We do have the Americana Trailer Wheel Center Cap # AM90175 which you can scuff and paint black if you do not like the design of the cap above.

expert reply by: Bud M

0

Answer 1

Long story short, yes you can. But going with the ST205/75R14 would be a better replacement than a ST205/75D14 because the R in the first size means it is a radial tire whereas the D in the second size means it is a bias ply. The main difference…

view full answer...

Answer 2

Hey Lee, so in reality you may not ever have an issue using different Load Ranges on a trailer but it's really not recommended as the tires will have to have different PSIs which could in theory create ride issues.

view full answer...

Answer 3

The Aluminum Sendel Series T07 Black Machined Trailer Wheel #AM97XR can fit on higher rated axles than your 3,500 lb axle as long as the hub has the standard 5 on 4-1/2 inch bolt pattern.

view full answer...

Answer 4

Your 2019 Heartland Cyclone model 4270 5th wheel is going to need the 35" Equalizers #MR39ZR like you found. You can verify this if you like by measuring from the center of the center wheel to the center of the front and rear axles. You…

view full answer...

Answer 5

It sounds like you're using our system to look up both the tire and wheels as opposed to just wheels. Your ST215/75R14 tires will install on 14" wheels and out of our linked selection I recommend checking out the Aluminum Sendel…

view full answer...

Answer 6

Hey Buddy, so the Fastway Adjustable Ball Mount part #DTSTBM6825-2S is a really great choice for the 2-1/2 inch hitch of your 2021 Ford F-250 which is going to be very solid in your hitch due to it's built in anti-rattle device that is easy to…

view full answer...

Answer 7

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…

view full answer...

Answer 8

It does; the valve stem is indeed included with the Karrier ST205/75R15 Radial Trailer Tire with 15" Aluminum Wheel - 5 on 4-1/2 - Load Range C #KE27JR.

view full answer...

Answer 9

I spoke to Americana and the Aluminum Sendel Series T07 Black Machined Trailer Wheel #AM25DR does indeed have steel inserts in the lug nut holes. This will help to protect them from galvanic corrosion when installed.

view full answer...

Answer 10

You won't have any issues. 3" back space means that from the surface of the wheel that mounts to the hub to the back edge of the wheel nearest to the trailer frame measures 3", so your new wheels are going to be 1/4" further away…

view full answer...

Answer 11

You will be able to use hub bolts to mount the Aluminum Sendel Series T07 Black Machined Trailer Wheel #AM25DR. In order to make this work, you will need to use bolts that have a 60 degree cone and match the 1/2"-20 wheel bolt size used by these…

view full answer...

Answer 12

We do indeed have center caps and lug nuts that will fit the Americana Aluminum Sendel Series T07 Black Machined Trailer Wheel #AM25DR. For the center caps, we have the Excalibur Trailer Wheel Center Cap #319EZ. These are chrome plated steel, but do…

view full answer...