Recommended Bearing Buddy Bearing Protectors for 1.98 O.D.

Question

Question:

Hello, I have a tandem axle boat trailer that has Dexter Vault Caps that I havent been able to find anywhere. The part number from Dexter was K71-030-00 for 1.98 OD. Do you offer any solutions that will work with my trailer?

asked by: Brock D

0

Expert Reply:

I took a look online and the closest thing we have to matching the caps in the vault service kit is going to be the Bearing Buddy Bearing Protectors item # BB1980T-SS. The caps on the bearing buddies will allow your boat trailer wheels to be completely submerged. They provide easy access for lubing your axles.

I have linked an installation video below.

expert reply by: Jerred H

0

Answer 1

We do have Bearing Buddys with threads on them, but you'll need to verify fitment on your end: Stainless Steel - #BB1980T-SS fits a 1.980" hub bore Stainless Steel - #BB2080T-SS fits a 2.080" hub bore Stainless Steel - #BB2441T-SS fits…

view full answer...

Answer 2

If you have a hub that requires the protector to be threaded in I recommend the Bearing Buddy Bearing Protectors #BB1980T-SS, but if you just need protectors that you tap into the hub with a block of wood and hammer, then I recommend the Bearing…

view full answer...

Answer 3

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 4

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 5

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...

Answer 6

To see all of the correct wheel and tire combos you'd need check out the link I attached. The option I would recommend is the part #TA43RR which is a Load Range C tire size ST175/80R13 mounted on a white spoke wheel with a bolt pattern of 5 on…

view full answer...

Answer 7

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 8

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 9

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 10

To tow your trailer that uses an RV style 7-way blade style connector with your semi that has a 7-pin connector, you need to construct an adapter that will also combine the brake signal into the right and left directional signal pins. This can be…

view full answer...

Answer 11

We do have the Rhino-Rack Masterkey Lock Barrels #RRRK093-2 which will provide you with 2 new lock cores and keys for your Rhino-Rack Zenith MasterFit Rooftop Cargo Box #RRRMFZ66. As far as pricing goes on the different sets they can change based on…

view full answer...

Answer 12

The 18.5x8.5-8 is actually an old tire size that is not used much anymore. The closest metric size to your existing tire would be 215/60-8. Your wheel most likely has a 5-on 4-1/4 inch bolt pattern (see link), you will want to make sure that the bolt…

view full answer...

Recommended Bearing Buddy Bearing Protectors for 1.98 O.D.

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching