bing tracking image
Q & A Icon

Recommended Custom Fit Flat Towing Wiring Harness for a 2014 Jeep Wrangler Unlimited  

Question:

Do you have a RV tow harness similar to Mopar 82211156AB. This part is made to wire permanently to the towed vehicle and plug into the towing vehicle and then connected via a pig tail.

1

Helpful Expert Reply:

We have something similar that is also custom fit. It is the Hopkins Custom Tail Light Wiring Kit for Towed Vehicles item # HM56200. This plugs into your Jeep's existing wiring and gives you a 4-way harness that can be used for flat towing.

I have linked an installation video below along with some other parts you may need to flat tow your Jeep.

Tow Bar and Safety Chains - Roadmaster Falcon 2 Tow Bar item # RM-520 and item # RM-643

Base Plate Kit - You will need a direct connect kit to work with the Falcon 2 tow bar. We have several options depending on what type of front bumper you have and the model of your Jeep. I have included the link below for all of our options.

Supplemental Braking System - Brake Buddy Select 3 Portable Supplemental Braking System item # HM39524

High Low Adapter - The tow bar needs to be within 3" of level. If you measure the height of the inside top of the hitch receiver tube on your RV, and the height difference is more than 3 inches above/below the base plate tab height, you'll need a high/low adapter. I have linked a FAQ article that explains all this in more detail along with our selection of adapters.

expert reply by:
1
Jerred H

Products Referenced in This Question




Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>