Replacement MaxxAir Circuit Board for 4751K

Question

Question:

Maxx air fan control board. What new number would be used for old4751K_Board_V1.4

asked by: William D

1

Helpful Expert Reply:

Based on what you mentioned the correct replacement circuit board would be the part # MA10A04751KS.

expert reply by: Jameson C

1

Answer 1

The correct replacement for your MaxxAir Circuit Board 10-04751ks is the following part: - Replacement Printed Circuit Board for MaxxAir MaxxFan Plus Roof Vents #MA10A04751KS As for the sensor wires, so long other wires are not damaged, I don't…

view full answer...

Answer 2

Our installers and customer experiences have led us to believe that the Furrion tankless heaters like the part #FR98SR are by far the best and most reliable so that is what I would recommend. Not saying that the Fogatti is a piece of junk but the…

view full answer...

Answer 3

It does sound like you need a new circuit board for the 4951KS that you have based on what you described from your vent. So for that you'd want the part #MA10A04751KS and you'd be set.

view full answer...

Answer 4

You will need to test the wiring to determine if the Lift Motor #MA10-20270 is getting power when you press the remote. This will help you determine if the motor is bad or the Printed Circuit Board #MA10A04751KS on your MaxxAir fan. A Test Light…

view full answer...

Answer 5

The correct circuit board for your MaxxAir MaxxFan 4951KS fan is the Replacement Printed Circuit Board for MaxxAir MaxxFan Plus Roof Vents #MA10A04751KS. It also works with The MaxxAir MaxxFan 4751KS and 4761KS models as well.

view full answer...

Answer 6

Yes, the Alpha Systems 1010 Non-Sag Sealant for RVs #AL53KV that you referenced would be okay to use with the Dico non sag lap sealant you mentioned. The Alpha sealants do not have to be exclusively used with Alpha setups.

view full answer...

Answer 7

After replacing The Printed Circuit Board for MaxxAir MaxxFan Plus Roof Vents #MA10A04751KS, and the motor still does not open the lid you will need to replace the motor. The Replacement 12-Volt Variable Speed Fan Motor for MaxxAir MaxxFan RV Roof…

view full answer...

Answer 8

Thanks for reaching out! Since you have the 4951KS model MaxxFan roof vent you'll need the Replacement Printed Circuit Board for MaxxAir MaxxFan Plus Roof Vents #MA10A04751KS. The circuit board might look slightly different as far as the pieces…

view full answer...

Answer 9

All the "C" stands for in the 4951-KSC part number has to do with the "Clear" aspect of your fan. With that being said, for a replacement circuit board you can use the Replacement Printed Circuit Board for MaxxAir MaxxFan Plus…

view full answer...

Answer 10

I reached out to my contact at MaxxAir and she said that the correct printed circuit board for your MaxxAir model 4751KSV05 powered vent fan is the part #MA10A04751KS.

view full answer...

Answer 11

From the information you have provided, it sounds like you most likely have the MaxxAir MaxxFan 4751KS. If that is indeed the case then the Replacement Printed Circuit Board for MaxxAir MaxxFan Plus Roof Vents #MA10A04751KS would be the correct…

view full answer...

Answer 12

You can use the Replacement Printed Circuit Board for MaxxAir MaxxFan Plus Roof Vents #MA10A04751KS to replace your damaged 10A04751ksz MaxxAir circuit board. This is a direct replacement.

view full answer...

Replacement MaxxAir Circuit Board for 4751K

Product Page this Question was Asked From

Continue Researching