Does etrailer Offer Any RV Power Cords Made In The United States

Question

Question:

Do you offer any made in USA cords?

asked by: Ronald G

0

Expert Reply:

Yes, the SmartPlug line of power cords and all of their other accessories are all made here in the United States. Since you were looking at a 50 amp power cord you would need the SmartPlug RV Power Cord - 50 Amp - 30' # SM86FR along with the correct power inlet.

Since you have a 2018 Airstream Flying Cloud Travel Trailer you'll most likely want the stainless steel inlet # SM79FR, but we also have a few other color options if you'd like:

Black # SM56FR
White # SM89FR
Gray # SM29FR

expert reply by: Kevin C

0

Answer 1

The Mighty Cord RV Power Cord #A10-5025ED90 is made in China. Don't let this discourage you though. This is a well built and sturdy power cord and I have not had any issues with their products brought to my attention. That said, if you are…

view full answer...

Answer 2

Yes. In order to use the SmartPlug Replacement RV Power Inlet - 50 Amp #SM56FR you will need to replace your old twist lock power cord with a SmartPlug RV Power Cord - 125/250V - 50 Amp - 30' #SM86FR.

view full answer...

Answer 3

Yes the SmartPlug RV Power Cord #SM86FR that you referenced will stay flexible when the weather is cold. This would not get difficult to wrap up if the temperature was to drop.

view full answer...

Answer 4

I have a power cord which is the same thing but more so what you're looking for. This cord is rated for 125 and 250V unlike the one you were looking at. The SmartPlug RV Power Cord - 125/250V - 50 Amp - 30' Item #SM86FR is rated for 125/250V.…

view full answer...

Answer 5

You are trying to convert it from a regulated low pressure to a lower pressure? Or are you just trying to make the connections with the propane lines? If it's just a line adapter you need you'd want the part #100476-120-MBS.

view full answer...

Answer 6

I do have an option for you though most shore power cords are not really designed to be serviceable so I would strongly recommend a full replacement option, the Mighty Cord Detachable RV Power Cord part #A10-5025EDBK. However, we do carry a few…

view full answer...

Answer 7

Hey David, from previous customers of ours who have the same 2020 Keystone Raptor 424 we have determined that your pin box style is the Lippert 1621 which means for a Gen-Y gooseneck adapter you'd want the #GY58GR that you referenced.

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

You'll be able to connect your Weber Traveler Grill directly to that quick-disconnect fitting using a hose like the MB Sturgis #100476-120-MBS as long as your grill doesn't have a regulator. If it does have a regulator then you need a tee…

view full answer...

Does etrailer Offer Any RV Power Cords Made In The United States

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching