Replacement Connector for 50 Amp RV Shore Power Cord

Question

Question:

Simply looking for the ends for a 50A cord. RV male to go to power pedistal and twist lock female to go to coach. My cord is good, just need the replacement ends

asked by: Dave

0

Expert Reply:

I do have an option for you though most shore power cords are not really designed to be serviceable so I would strongly recommend a full replacement option, the Mighty Cord Detachable RV Power Cord part # A10-5025EDBK. However, we do carry a few replacement ends such as the Furrion Replacement Connector part # 381684. Unfortunately, we do not offer the male end for a 50 amp shore power cord.

expert reply by: Conner L

0

Answer 1

If it where me I would replace the whole thing. The reason for that is if it is the ends and the problem is caused by corrosion that corrosion could be spreading to the wiring inside and you wouldn't be able to access it. Then you would having…

view full answer...

Answer 2

Yes, the SmartPlug line of power cords and all of their other accessories are all made here in the United States. Since you were looking at a 50 amp power cord you would need the SmartPlug RV Power Cord - 50 Amp - 30' #SM86FR along with the…

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

Yes, you will need a spacer. The Air Lift LoadLifter 5000 Air Helper Springs item #AL57341 are designed for the stock height on your 2024 GMC Sierra 2500. Which spacer you need is going to be determined by how big of a lift you actually have in the…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

The Gen-Y Hitch 5th Wheel to Gooseneck Pin Box item #GY98GR weighs a hefty 120 lbs. This is the only way to add a gooseneck pin box to a 5th wheel trailer with a Rhino Box. You will also need the Safety Chain with 2 Hooks item #GY49GR. State laws…

view full answer...

Answer 8

The Demco part #DM6107 is the head and base for the Hijacker Autoslide with a 21k capacity. To attach this to a set of above bed fifth wheel rails you would need the part #DM6003. Then for a set of above bed rails that fits your 2012 Chevy Silverado…

view full answer...

Answer 9

No, there are no custom fit base plates for a truck that old. The only thing I can offer you is the Blue Ox Heavy-Duty Universal Bolt-On Adapter Tabs item #BX88266. These are compatible with Blue Ox tow bars and are a universal part. They bolt…

view full answer...

Answer 10

Hi Mark; thanks for the question and I have some good news for you as we have the exact 5th wheel to gooseneck adapter to replace the Turning Point pin box on your Jayco Eagle HT 30.5 CKTS. The correct part is the following: - Gen-Y Hitch Shock…

view full answer...

Answer 11

The overall height of the Timbren Spring Kit part #TGMRCK25D is 6-1/4 inches.

view full answer...

Answer 12

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Replacement Connector for 50 Amp RV Shore Power Cord

Product Page this Question was Asked From

Continue Researching