Spindle And Hub With 8 on 6-1/2 Bolt Pattern For 7,000 lb Axles
Question:
I need 2- spindle and hub kit for 7000 pound axle. The hub needs to be a GM patterned 8 bolt since I have several wheel/tires already with that pattern.
asked by: Nathan B
Expert Reply:
Sure thing, we can get you a spindle for 7,000 lb axles as well as hubs with an 8 on 6-1/2" bolt pattern. You didn't mention if you wanted an idler hub or hub and drum so I'll go ahead and give you options for both:
- #42 Spindle for 5,200-lb to 7,000-lb Trailer Axles # TRU57FR
- Trailer Hub and Drum Assembly - 7,000-lb Axles - 12" Diameter - 8 on 6-1/2 - Pre-Greased # LC53UD
OR
- Trailer Idler Hub Assembly for 7,000-lb Axles - 8 on 6-1/2 - Pre-Greased # AKIHUB-865-7-2-K
Both hubs are pre-greased, saving you a step when you install them, and they also come with the needed bearings, races, and grease seal so you don't have to purchase those separately.
Products Referenced in This Question
Trailer Hub and Drum Assembly - 7,000-lb Axles - 12" Diameter - 8 on 6-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Pre-Greased
- Standard
- 25580
- 14125A
- For 7000 lbs Axles
- 1/2 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Lippert
more information >
#42 Spindle for 5,200-lb to 7,000-lb Trailer Axles - 2-1/4" Diameter
- Trailer Spindles
- Standard Spindle
- 2-1/4 Inch Diameter
- Round
- For 5000 lb Axle
- For 6000 lb Axle
- For 7000 lb Axle
- TruRyde
more information >
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 7,000-lb Axles - 8 on 6-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- 25580
- 14125A
- For 7000 lbs Axles
- 1/2 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: Agricultural Spindle for 6,000-lb Trailer Axles - 2-3/4" Diameter
- Shop: Trailer Idler Hub Assembly for 7,000-lb Axles - 8 on 6-1/2 - Pre-Greased
- Shop: #42 Spindle for 5,200-lb to 7,000-lb Trailer Axles - 2-1/4" Diameter
- Search Results: #42 spindle
- Q&A: Compatibility of TRU67FR Spindle and Dexter 42655UC1 Idler Hub
- Shop: Trailer Hub Assembly - 8 on 8" - 6,000 lb
- Shop: Dexter Trailer Idler Hub Assembly for 9,000-lb to 10,000-lb Axles - 8 on 6-1/2 - Oil Bath
- Search Results: ah60880fcomp
- Search Results: as6000f
- Shop: Trailer Hitch
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Article: Trailer Wiring Diagrams
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: bearing buddy
- Shop: Trailer Wiring
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Article: Most Popular Wheel Bearings
- Search Results: trailer jack
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Article: Trailer Tire Sizing
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Shop: Suspension Enhancement
- Search Results: 10~36
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Search Results: lug nut
- Shop: Roof Rack
- Video: etrailer Electric Trailer Brake Kit Installation
- Article: How to Choose the Right Trailer Hitch Class
- Shop: Brake Controller