Preventing Leaks When Installing Derale # 15718 Engine Oil Filter Relocation Kit
Question:
I have had trouble with oil leaks from the treads of other installed relocation oil filter kits. I plan on using a thread sealant but I can find no answer on the torque of the attachment threads into the soft aluminum adapters. Some say to apply the thread sealant and the make them hand tight. Others say apply the sealant and make them hand tight then turn the treads an additional 1/4 of turn. What is your suggestion?
asked by: Ron
Expert Reply:
I spoke with my contact at Derale and they provided some very useful information. They said you do not want to use a liquid sealant of any type because it acts as a lubricant when first applied and would actually allow you to over tighten the fittings causing leaks. They suggest using a thread tape and tightening to approximately 8 to 10 ft lbs. Although the suggestion to hand tighten and then turn an additional 1/4 turn may work, the term hand tighten would be different for everyone.
Products Referenced in This Question
Derale Oil Filter Relocation Kit - 20 mm x 1.5 mm Engine Filter Threads
- Accessories and Parts
- Engine Oil Coolers
- Relocation Kit
- Derale
more information >
Product Page this Question was Asked From
Derale Radiator Adapter Fittings for GM
- Accessories and Parts
- Transmission Coolers
- Radiator Adapters
- Derale
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Causes of Leaks When Installing an Engine Oil Cooler
- Q&A: Transmission Cooler Recommendation for 2011 Chevy Silverado
- Q&A: Transmission Cooler Recommendation for a 2004 Chevy Silverado 2500HD with 6.0 Towing a 5th Wheel
- Article: Frequently Asked Questions About Transmission Coolers
- Q&A: Trailer Wiring Needed for 2017 Chevy Traverse with Rear Air Conditioning Unit
- Article: RV Roof Types: What Type of Roof Does My RV Have?
- Article: Trailer Wiring Diagrams
- Q&A: Best Transmission Cooler for a 2003 GMC Sierra 2500HD with 6.0L V8 Engine
- Q&A: Bypassing Factory Transmission Cooler to Prevent Radiator Problems on 2012 Nissan Frontier
- Q&A: How To Install 7-way Connector On 2010 Chevy Express Van 3500 Without Factory 7-way Connector Plug
- Article: How to Choose the Right Trailer Hitch Class
- Article: Transmission Cooler
- Article: Adapters for Towing a 5th Wheel Trailer with a Gooseneck Hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)