Availability of Roadmaster Tie Plates for Shock Kit on 3" Axle

Question

Question:

Can you get Roadmaster slipper spring P/Ns C003170 and C003169? I have a RM2570-2580 8K kit that I want to use on a 7K 3 axel. I realize this kit has a 8K 7 leaf system but would like to utilize it on my current trailer. These shock brackets seem to be the only other difference. Thanks.

asked by: Tim S

0

Expert Reply:

Yes, we have the tie plates you're looking for that will fit a 3" axle. The # RM22MR is the C003169 with the notch and the # RM54GR is the C003170. Using these will convert the shock kit portion of your comfort ride system into the # RM-2460.

expert reply by: Robin H

0

Answer 1

Since you have 8K 3" axles you'll just need the Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shocks - Tandem 8K, 3" Trailer Axles #RM-2460-2580. The 3-1/2" requirement you were getting with the #RM-2470-2580 was simply…

view full answer...

Answer 2

Currently Roadmaster is the only supplier for the 8,000 lbs capacity 27" long slipper springs that are used on the Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shocks item #RM-2460-2580. We do offer the following replacement parts:…

view full answer...

Answer 3

Yes, you can use the Roadmaster Comfort Ride Leaf Spring Suspension Kit 8K part #RM-2460-2580 with 7,000 lb axles.

view full answer...

Answer 4

Between the 7K #RM-2460-2570 and 8K #RM-2460-2580 Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shocks I recommend going with the 7K for your 2018 Vilano 5th wheel. It will give you the best ride possible since it's designed to work with…

view full answer...

Answer 5

If the suspension of your 2019 Grand Design 351M is currently in good working order but you want to improve what you have by making the ride quality smoother you could go with just the shock portion of the Roadmaster Comfort Ride with part #RM-2470.…

view full answer...

Answer 6

The ability of the #RM-2460-2580 Roadmaster Comfort Ride Leaf Spring Suspension Kit to fit without modifications will depend on the existing suspension. This isn't a RV-specific item, the system would be a direct replacement if the RV has…

view full answer...

Answer 7

The number of leaves on a leaf spring is not the only determining factory in the amount of weight it can handle. The thickness of each leaf as well as what the leaf is made out of can affect the weight rating and performance of the spring. The…

view full answer...

Answer 8

The Roadmaster Comfort Ride you'd want for your 2020 Arctic Fox 29-5T is the #RM-2460-2580 which is properly rated for your trailer, fits your 3 inch axles, is height adjustable so it can match the height you currently have, and will get rid of…

view full answer...

Answer 9

The Roadmaster Comfort Ride system #RM-2460-2570 that you referenced won't add height to your trailer but it is perfectly compatible with the MorRyde systems you've mentioned as we have asked them about it in the past.

view full answer...

Answer 10

The Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shocks #RM-2470-2580 will fit perfectly with your 30-1/2" hanger spacing according to my contact at Roadmaster. The only "guide" they have as far as fitment goes is that the…

view full answer...

Answer 11

Yes, it does. I checked with Roadmaster and the Comfort Ride Leaf Spring Suspension Kit item #RM-2460-2570 will work with your Luxury Lifestyle 5th wheels 33-1/2" axle spread. Your 7,000 lbs axles should be 3" diameter so this is definitely…

view full answer...

Answer 12

The distance you have between the axles of your Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers #RM-2460-2570 that you referenced is perfectly fine. I am not sure exactly which model of 2017 Sandpiper you have but as long as the…

view full answer...

Availability of Roadmaster Tie Plates for Shock Kit on 3" Axle

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching