4-Bike Rack that Can Carry Two 80 lb E-Bikes

Question

Question:

i need an e-bike rack that holds 4. Hitch rack. 2 bikes are 80lbs each and 2 others are 50lbs each

asked by: Anthony B

0

Expert Reply:

The Hollywood Rack E-Bike rack part # HLY84FR can be used with the 2 bike add on part # HR1475Z and you'd have a 4 bike carrier with the inside two bike cradles having an 80 lb per bike capacity. This would be a really great option and is actually only option that would work.

expert reply by: Jameson C

0

Answer 1

There is one bike rack which can work for for you, as it has the maximum capacity of 80 lbs per bike (160 lbs total for a 2-bike rack), which is from Hollywood Racks: - Hollywood Racks Sport Rider SE Bike Rack for 2 Electric Bikes #HLY84FR I assume…

view full answer...

Answer 2

For the heavier bikes you have (one with a fender) the best solution will be a Hollywood Rack E-Bike Rack part #HLY84FR which has an 80 lb per bike capacity plus it grabs the bike frame instead of the wheel which means it will work well with your…

view full answer...

Answer 3

The Hollywood Racks Sport Rider SE Bike Rack part #HLY84FR is an excellent bike rack option with 80 lb per bike weight capacity. It has a lifetime warranty and comes with locks for both the bikes and racks.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 7

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 8

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 9

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 10

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 11

Yes, the Curt hitch part #C77ZV is a fit for the 2023 Toyota Crown Hybrid. I attached a link to the install instructions as well as a link to an installer finder in case you wanted to find someone near you to install the hitch.

view full answer...

Answer 12

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...