Can Roadmaster Reflex Steering Stabilizer Fit with Roadmaster Sway Bar

Question

Question:

Will this work on a 2021 thor omni that has a road master anti sway bar also installed?

asked by: Justin

0

Expert Reply:

Yes, the Roadmasater Reflex steering stabilizer part # RM55VR is compatible with a Roadmaster sway bar installed as well. They actually work really well together and would give you a much better overall driving experience.

expert reply by: Jameson C

0

Answer 1

According to Roadmaster, the #RM55VR Reflex Steering Stabilizer is compatible with vehicles equipped with a steering damper. The steering damper will remain in place once the steering stabilizer is installed, and will work along with it.

view full answer...

Answer 2

We have a front sway bar that fits your 2022 Ford F-550 Cab and Chassis with the part #RM35VR which will do a great job improving handling and stability but we do not have a rear bar at this time.

view full answer...

Answer 3

I checked with Roadmaster, and while there is a steering stabilizer for your 2021 Thor Magnitude BB35 Class C on a Ford F-550 chassis, there is not an Exact Center stabilizer, just the Reflex. The correct part number for your Thor is the following: -…

view full answer...

Answer 4

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 7

Hey David, actually what is going to make the biggest improvement in handling and stability for your 2011 Itasca is an upgraded rear sway bar with the part #RM-1139-175. I know that's not what you asked about but for motorhomes where most of the…

view full answer...

Answer 8

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Answer 9

The air suspension system on your 2022 Ram 2500 limits your options for suspension enhancement. None of the air bags made for your truck will be compatible. Instead, I recommend adding the SumoSprings Rebel Custom Helper Springs #SS64VR. The…

view full answer...

Answer 10

The torque spec for the rear U bolts on your 2019 F53 motorhome are dependent on the size. If you have 3/4 x 16 u bolts (and used a 1 1/8" socket to remove the nuts) then they torque to 250 lb-ft. If the u bolts are 7/8 x 14 (and you used a 1…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

The Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets #RM47MR typically comes centered and you would only need to make adjustments after installation and testing to see if it continues to pull. If you adjusted it all the way out to where…

view full answer...

Can Roadmaster Reflex Steering Stabilizer Fit with Roadmaster Sway Bar

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching