Draw-Tite Trailer Hitch Receiver Comparison and Wiring Harness For a 2003 Dodge Grand Caravan Sport
Question:
Trying to figure out which hitch will I need for a 2003 Dodge Grand Caravan Sport. It does have a rear sway bar but doesn’t have stow and go seats so not sure if I need #36296 or #75119 hitch. Looks like both will fit after watching your install videos. Thank you
asked by: Matt
Expert Reply:
You will be able to use either the Draw-Tite Trailer Hitch Receiver Class II # 36296 or Class III # 75119 on your 2003 Dodge Grand Caravan Sport. The class II will have the least affect on ground clearance with a 1-1/4" opening and has a cleaner appearance while the class III has the higher capacity, larger 2" opening and will allow for weight distribution and sway if you are towing a larger trailer like a RV Camper.
The T-One Vehicle Wiring Harness # 118376 will provide you with a 4-way flat connector. This is most commonly used on smaller trailers and can also be used for Auxiliary Lights # C53201. For larger trailers that use a 7-way you will need to add the Universal Install Kit # ETBC7. This will also allow you to add a Brake Controller # 90195 if your trailer uses electric brakes.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class II
- 300 lbs TW
- 3500 lbs GTW
- 1-1/4 Inch Hitch
- Concealed Cross Tube
- Draw-Tite
more information >
Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LCD Display
- Up to 360 Degrees
- Tekonsha
more information >
Curt Auxiliary LED Indicator Lights
- Accessories and Parts
- Hitch Bike Racks
- Hitch Cargo Carrier
- Lights
- CURT
more information >
Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 350 lbs TW
- 3500 lbs GTW
- 5000 lbs WD GTW
- 2 Inch Hitch
- 500 lbs WD TW
- Visible Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Wiring Harness Options For A 2023 Kia Telluride SX Prestige Model
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: How To Find Lock Code for Keys To Camper
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: What Does Weight Capacity Of Trailer Leaf Spring Mean?
- Q&A: Should Leaf Spring Capacity Match Trailer Weight or Axle Weight for Best Ride Comfort
- Q&A: Which Way Do Slipper Springs Face on a Trailer
- Article: Rooftop Cargo Carriers
- Article: Trailer Hitch Receiver Sizes
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Q&A: What Trailer Hitch Fits a 2019 Dodge Grand Caravan with Stow-N-Go Seats
- Article: My Trailer Hitch Doesn't Fit
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: What is Overlanding? How to Start your Overlanding Journey