Installation Instructions for 4 Pole to 7 and 4 Pole Adapter part # 37185
Question:
need installation instructions for #37185, can not find on your site. Thanks,
asked by: kerry g
Expert Reply:
Part # 37185 is a universal item that can be installed on virtually any vehicle, so there are no vehicle specific instructions, but I will outline how it is done. The 4 pole connector, Green/Yellow/Brown wires, will connect to the 4 pole already on your 2006 Toyota Tacoma. The Blue wire is run up the truck and connected to the brake output wire on your brake controller, usually also blue. The White wire is a ground wire and should be grounded to the vehicle frame. The Black wire is run up to the vehicle battery to provide a 12V power source. Depending on what it is powering, you would add an inline fuse to protect the circuit. If you do not need a power source for the trailer, this connection can be omitted. The Purple wire is an Auxiliary wire that can be used for reverse lights, reverse-lockout to prevent surge trailer brakes engaging while vehicle in reverse, or it can be an additional 12V power source if needed. Again, the Purple wire can be omitted if not needed.
You can mount the bracket and 7 Pole any where you like. Pick a spot that is easy to access and is sturdy to avoid the connector falling off.
Also check out part # ETBC7. This is a kit that provides everything necessary for a brake controller and 7Way install minus the brake controller itself. There are some good install videos on the ETBC7 page.
Products Referenced in This Question
Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
Product Page this Question was Asked From
Adapter 4-Pole to 7-Pole and 4-Pole
- Trailer Wiring
- Wiring Adapters
- Multi-Function Adapter
- 4 Flat
- Plug and Lead
- 4 Flat
- 7 Round - Blade
- Hopkins
more information >
Featured Help Information
Instructions
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Brake Controller Installation on a Ford Full-Size Van
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: How to Measure for Trailer Hitch Drop
- Q&A: How To Connect 4-Way Flat Vehicle Connector To 7-Way on Trailer
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: My Vehicle has a 4-Pin Trailer Plug, but Trailer has 7-Pin Trailer Plug
- Q&A: Parts Needed to Install 7-Way Trailer Connector on 2021 Honda Odyssey
- Q&A: Trailer Hitch for a Lance Travel Trailer
- Q&A: Can I Use a 4 Way Vehicle Connector with 7 Way Adapter and the Curt Echo Brake Controller?
- Q&A: Parts Needed For Tekonsha Prodigy P2/P3 Trailer Brake Controller on 2001 Ram 1500 No Tow Package