Recommended E-Bike Rack for a Step-Thru Bike With Fenders On A 2020 Chevrolet Traverse

Question

Question:

Recommendation for ebike hitch mount carrier. The bike is a step through and has fenders. Thanks

asked by: Dennis

0

Expert Reply:

For your 2020 Chevrolet Traverse, I recommend checking out the :

-Swagman E-Spec Bike Rack for 2 Electric Bikes # S94FR.

This bike rack is capable of handling 2 e-bikes weighing up to 70-lbs each, for a total of 140-lbs, can accommodate up to a 3" wide tire, and will work with bikes that have fenders as well as step-thru bikes.

I have attached a product review video for you to check out as well.

expert reply by: Bryce D

0

Answer 1

It seems like your Trek 3 is about 50 lbs without the battery. Always haul without your battery loaded. You can use the RockyMounts MonoRail Solo 1 #RKY10007 as it has 60 lbs per bike and does not have any frame contact. This is nice because it is…

view full answer...

Answer 2

Thank you for the photo of your Specialized Vado bike's front fork area which shows the fender and fork bridge. A wheel-mount rack such as the RockyMounts MonoRail Solo 1 Bike Platform Rack #RKY10007 will work for your Vado if you remove the…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 6

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 7

Yes, you can install a Curt Trailer Hitch Receiver #C11433 on your 2019 Chevrolet Spark. This receiver is capable of supporting up to 200lbs of tongue weight. With each of the Lectric 3.0 e-bikes weighing roughly 60lbs without the battery you will…

view full answer...