Is There an Install Video for Roadmaster Rear Sway Bar on 2022 Tiffin Allegro Red 340

Question

Question:

Looking at RM 1209-140 rear sway bar for my 2022 Tiffin 340 AL on Freightliner xcs chassis. Do you have any reviews or installation videos specific to that part number on an xcs chassis? Thanks

asked by: Chuck

0

Expert Reply:

I checked with Roadmaster and confirmed the Roadmaster Rear Anti-Sway Bar part # RM-1209-140 as a fit for a 2022 Tiffin Allegro Red 340 on Freightliner XC-Series Chassis. It doesn't look like we have any install videos at this time (they will be displayed on the product page when available) but after looking over the instructions which are attached below, the process looks pretty easy and straightforward. There is no drilling required, just nuts and bolts and you don't have to remove anything. It's certainty something that most can do in their driveway at home. It's estimated to take around an hour for install per Roadmaster.

Please note, there is also a front anti-sway bar available, the Roadmaster Front Anti-Sway Bar part # RM-1209-139 which would make a nice pairing with the above.

expert reply by: Conner L

0

Answer 1

While we do have an option for an anti-sway bar you can use, I checked with Roadmaster, and there isn't a steering stabilizer that fits your 2021 Tiffin Allegro Red 33AA. What you can use instead, and will actually improve your ride even…

view full answer...

Answer 2

The front of motorhomes are pretty standard for the chassis designers. Since most of the weight of the motorhome body will end up on the rear axle it's harder for chassis manufacturers to anticipate how to build the rear sway bars.…

view full answer...

Answer 3

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 6

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Answer 7

The air suspension system on your 2022 Ram 2500 limits your options for suspension enhancement. None of the air bags made for your truck will be compatible. Instead, I recommend adding the SumoSprings Rebel Custom Helper Springs #SS64VR. The…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

Hey David, actually what is going to make the biggest improvement in handling and stability for your 2011 Itasca is an upgraded rear sway bar with the part #RM-1139-175. I know that's not what you asked about but for motorhomes where most of the…

view full answer...

Answer 10

The Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets #RM47MR typically comes centered and you would only need to make adjustments after installation and testing to see if it continues to pull. If you adjusted it all the way out to where…

view full answer...

Answer 11

I'm assuming your 2024 F-250 has the 6-3/4' bed. If that is correct, the right tie-downs are in fact the #TLF3008 and #TL77CR. TorkLift has accounted for the bed access steps on the 2024 model and confirmed these will fit your truck.

view full answer...

Answer 12

The torque spec for the rear U bolts on your 2019 F53 motorhome are dependent on the size. If you have 3/4 x 16 u bolts (and used a 1 1/8" socket to remove the nuts) then they torque to 250 lb-ft. If the u bolts are 7/8 x 14 (and you used a 1…

view full answer...

Is There an Install Video for Roadmaster Rear Sway Bar on 2022 Tiffin Allegro Red 340

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching