How To Attach Curt Replacement OEM USCAR Trailer Connector to 4-Way Harness on Jeep Wrangler

Question:

Hello, Is there an adapter that will connect a 4 Wire towing wiring harness to a 7 Blade and 4 Flat plug? I have an aftermarket bumper that has a special place for the seven blade and four flat plug to mount however I’m going to install a four wire towing harness kit not a seven wire. I need something that will allow me to plug in the four wire connector to the back of the seven wire plugs on the bumper. Thank you

asked by: Jeff

Expert Reply:

In order to use the Curt Replacement OEM USCAR Trailer Connector part # C42JR you'll need a harness like the Tow Ready Replacement 7-Way Harness part # 20147 which will then wire onto the existing trailer harness. For example, if you have a 2019 Jeep Wrangler you'd need to use the T-One Vehicle Wiring Harness part # 118786. The trailer connector on the T-One Vehicle Wiring Harness would be removed and then attached to the Tow Ready Replacement 7-Way Harness. There will be extra wires for the additional functions of the different style connectors that you can either attach accordingly or tie them up.

expert reply by: Conner L