Will the Edge Evolution CTS3 Performance Tuners Work On Gas and Diesel Engines

Question

Question:

Does a cts3 work on a gas and diesel trucks?

asked by: Nicks

0

Expert Reply:

The Edge Evolution CTS3 Performance Tuners are engine specific meaning there are different options depending on which engine you have. For example, if you have a Chevy Gas Engine like the 5.3L, 6.0L, or 6.2L you'd likely need the part # EP49YR but if you have a Chevy Diesel Engine like the 6.6L you'd likely need the part # EP69YR. If you can let me know the year, make, model, and engine option for your vehicle I'd be glad to see if there is an option for you.

I have attached our full list of Edge Evolution CTS3 Performance Tuners below for you as well.

expert reply by: Conner L

0

Answer 1

The difference between active suspension and airbags? Both products are going to add stability to the rear axle when weight is added. Both are going to change how the vehicle rides when no weight is on the vehicle. Both are going to be very similar…

view full answer...

Answer 2

As it sounds like you have your suspension set on your 2015 Chevrolet Silverado 1500 the next area I recommend focusing on is going to be the performance. The Edge Gas Evolution CTS3 Performance Tuner #EP39YR will allow you to add a custom tune that…

view full answer...

Answer 3

I called my tech at Edge Performance, and he confirmed that the three different tunes that are on the Edge Gas Evolution CTS3 Performance Tuner #EP59YR include the following increased horsepower levels: 1. 15 hp 2. 18 hp 3. 23 hp The CTS3 is…

view full answer...

Answer 4

It's hard to get great gas mileage when towing but we do have programmers that are a fit for your 2013 Chevy Silverado 1500 5.3 liter like the Edge Gas Evolution part #EP85350 which will help. This will give you an additional 20 ft lbs of torque.…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 12

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...